• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar

FloorJackin'

Ultimate Unbiased Reviews Hub

  • Home
  • Jacks
    • High Lift Jacks
    • Hydraulic Jacks
    • Transmission Jacks
    • Farm Jacks
    • Bottle Jacks
    • Portable Car Jacks
    • Scissor Jacks
  • Floor Jacks
    • Best Floor Jack of 2021
    • 3 Ton Floor Jack
    • 2 Ton Floor Jacks
    • Low Profile Floor Jacks
    • Aluminum Floor Jacks
    • Floor Jack for Lifted Trucks & SUVs
  • Car Lift
    • 2 Post Car Lifts
    • 4 Post Car Lifts
  • Stand Jack
  • Affiliate Disclosure

Steel Jacks vs Aluminum Jacks

by Janathan Greez | Last Updated April 5, 2022

Steel Jacks vs Aluminum JacksAssuming you’re discussing whether to purchase steel versus an aluminum floor jack, you face the same test as numerous other auto-mobile lovers or DIYers while picking the best floor jack for their garage.

People are rarely able to realize the difference between steel and aluminum when they choose one over the other.  It’s time to tackle the debate between steel and aluminum jacks.

Comparing Steel and Aluminum jacks

The distinctions between them are pretty obvious for the normal garage specialist, and there are not many circumstances where one material works positively better compared to the next. This article details a few of the differences between the two.

Weight

Maybe the greatest thought while looking at aluminum versus steel floor jacks is weight. As a rule, aluminum jacks will quite often be lighter than steel while contrasting jacks and with the equivalent lifting limit.

This will in general make aluminum jacks simpler to move than steel floor jacks, which makes them a most loved dashing jack for tweaking on your vehicle. Aluminum jacks are additionally somewhat simpler to lift and move around your garage, as well as more straightforward to roll and position when they are on the floor.

The lightest aluminum jack weighs around 20 pounds or 9 kgs, whereas the lightest steel jack weighs around 80 pounds or 36.5 kgs. So aluminum jack is a lot lighter and subsequently more simple to work with.

Strength

With regards to strength, a typical misguided judgment is that one kind of jack is more grounded than the other. The strength of a floor jack depends totally on its development. In other words, you could create an aluminum jack or a steel jack that would uphold any vehicle according to its lifting abilities.

All things considered, since you buy a floor jack that has the proper limit, it doesn’t exactly make any difference whatsoever assuming it is produced using aluminum or steel. The two of them will be sufficiently able to get your vehicle very high.

A 1.5 or 2-ton marked floor jack should cover your purposes whether it’s aluminum or steel. An expert workshop owner for the most part utilizes a 3-ton jack to cover every one of the nuts and bolts. Yet, as long as you pick the right weight limit, you should approve of the two sorts of a floor jack to the extent that the strength goes.

Cost

While aluminum will in general win out on weight, steel jacks will more often than not win out on cost. Steel jacks will generally be somewhat less expensive on normal for an appraised limit than aluminum jacks. As a result of the weight reserve funds, aluminum jacks will quite often be showcased as superior items. If you’re not appallingly worried about weight, help yourself out and save yourself some coin by purchasing a floor jack built from steel.

Durability

Durability is a major element concerning the floor jack. Steel jacks are more solid and tougher than aluminum jacks. While aluminum jack is lighter it doesn’t keep going long as steel ones.

On the other hand, a steel jack is more inclined to rust. Assuming you use it in a climate where there’s a ton of dampness then the steel will rust. So you must be cautious about rusting while utilizing steel jacks. Aluminum is resistant to rusting yet it will in general break whenever utilized excessively.

Conclusion

Assuming you are purchasing a floor jack for your garage and have the financial plan then you should purchase an aluminum jack. If you will be involved in a genuine workshop, steel jacks would be a wise decision. Obviously, besides that, you better know for which purpose you are using and buying a jack.

 

Filed Under: Guide

About Janathan Greez

I'm Janathan. and I love autos, not just for rides but love playing around and fixing too. I'd like myself to be called as Autos Fixer Sixer Woman. I'm sharing my personal experiences about Floor Jacks through this blog (I call it Lifter though).

Recent Posts

  • Craftsman Jack Stands Review
  • OTC 1545 Motorcycle Lift Review
  • Pro Lift Jack Stand Review
  • Torin Jack Stands Review
  • Torin Motorcycle Jack Review

Categories

  • Floor Jacks
  • Guide
  • Single Product Review
  • Affiliate Disclosure
  • Terms and Conditions
  • Privacy Policy
  • Contact

Copyright © 2023