Doing heavy lifting around the house or garage for cleaning or lifting a vehicle to a considerable height for maintenance is a task that cannot be done by flexing your muscles unless you’re a hulk.

This simply means you need a tool like a floor jack that packs the strength of hulk to easily raise any heavy object in a snap.

The best quality floor jack comes in premium-grade aluminum or steel construction with high load capacity.

Its strong lift arm quickly raises a vehicle, small or big, to an ideal height required for undercarriage or suspension work including tire replacement with just a few pumps of the handle.

Lifting tons of weight doesn’t remain dangerous as most floor jack models come with overload protection and a padded saddle that perfectly fits the vehicle while keeping it safe from accidental impacts during lifting.

Best Floor Jacks of 2023 – Unbiased Reviews of Top Rated

To help you find a floor jack that will give you the best results on every use, below is a rundown of some of the best models available in the market. Take a look and decide which one is at par with your needs.

1.   Arcan ALJ3T Floor Jack

This is a premium quality floor jack that knows how to make a soft spot for itself despite the hefty price tag that it carries.

It’s lightweight yet strong enough at the same time to easily lift a good 3-tons of weight into the air without difficulty, thanks to its aircraft-grade aluminum construction. The inclusion of a reinforced lifting arm enhances strength, longevity, and torsion control of the skeleton. You can easily maneuver this nearly indestructible model in the garage or store it in the vehicle for an emergency tire change.

Profiling a side-mount handle allows you to easily position the jack under an object that needs maintenance, and the dual piston pump gives faster and fluid lifting even in an exasperating situation. This floor jack promises to keep your vehicle or any other object safe and secure while lifting as it employs a rubber saddle and foam handle bumper – significantly reducing the possibility of accidental damage from impact during maintenance.

Like your vehicle’s care, it pays equal attention to the tool’s safety as well. There are bypass and overload valves that prevent over-extension of hydraulic ram and jack to ward off damage to the equipment. With that being said, it’s a one-time investment, a mighty one though, that will give you powerful and sturdy equipment to accompany you for many years.

Pros

• Durable, lightweight, and compact.
• Maximum lifting capacity of 3-tons.
• Dual-piston pump for faster lifting.
• Rubber saddle and foam handle bumper protect the object of maintenance.
• Bypass and overload valves for unit’s protection.

Cons

• A bit costly

Bottom Line:

This is a premium quality, lightweight floor jack that can fluidly lift heavier objects to desired maintenance height without causing any damage to the object or the unit itself. The only put-off is its high cost.

2.   Blackhawk B6350 Floor Jack

Blackhawk has introduced this premium quality, sturdy floor jack with all the muscles and strength to fluidly lift an object as heavy as 3.5 tons without flexing. Such strength and toughness are attributed to solid steel frame construction which makes it a heavy piece of equipment that will be hard to move around, but the silver lining is that you can beat it up and yet it will work like a charm. Its sturdy wheels further assure that the unit is solidly built.

Like lifting capacity, its maximum lifting height is also higher than usual – raises an object to an impressive 22-inch height. Rolled frames on the side provide extra strength to the unit that makes it possible for the tool to lift heavy-duty vehicles or objects to such a high position. The release valve will allow you to lower your vehicle in seconds when you have completed the task.

Its swiveling padded saddle and rear caster allow you to adjust the tool to your desired position. You don’t have to worry about your safety while working underneath a vehicle due to its built-in internal safety valves and vent plug – that keep both, you and your equipment, safe while working with this floor jack. Like Arcan ALJ3T, this one also features safety bypass valves to prevent over-pumping of the tool, in return adding to the overall lifespan of the tool.

Pros

• Durable and long-lasting construction.
• 5-tons maximum lifting capacity.
• 22-inch maximum lift height.
• Built-in safety bypass and valve for operator’s and tool’s safety.
• Fast and easy lifting.

Cons

• Construction isn’t rustproof.

Bottom Line:

This solidly constructed floor jack packs extra strength and features higher than usual capacity both, for lifting height and maximum weight, to make it easier for you to raise heavy-duty vehicles like trucks and SUVs swiftly to an ideal position for maintenance.

3.   Powerzone 380044 Garage Floor Jack

This is another floor jack that’s making hype among car owners and professional mechanics mainly due to its aluminum construction that provides a much-coveted combination of durability, strength, and lightness both, in weight and price range. The heavy-duty steel lift arm adds extra strength and durability without cutting down on its portability.

Featuring swiveling real wheels makes it a breeze for an operator to adjust the position of the jack even on rough surfaces while working.

It can lift objects to 3-tons in weight to a considerable height of over 18-inches without difficulty. Thanks to the quick lift hydraulic system, the vehicle or any other object will be raised to maximum height in a flash while the built-in safety valve will make sure that you don’t overload it to cause permanent damage to the tool. As we’re talking about protection and safety, the rubber padded saddle and foam covered handle also call for attention as they promise to keep your vehicle’s frame protected from impacts while it’s being lifted.

Investing in this floor jack means you’ll be able to easily and safely lift the heaviest weight like a champion.

Pros

• Long-lasting, lightweight and portable.
• Safety valve to avoid overloading.
• Rubber padded saddle for protecting vehicle’s frame.
• The maximum load capacity of 3-tons with a quick lifting hydraulic system.
• Swiveling real wheels for snag-free positioning.

Cons

• Requires a lot of pumping to raise an object to the ideal height.

Bottom Line:

This highly durable and sturdy floor jack is a blessing for on-budget buyers. Despite the low price and lightweight frame, the tool is ideal for heavy-duty use but also asks for some arm’s exercise to lift heavy vehicles and objects for straightforward maintenance.

4.   Torin T83006 Trolley Floor Jack

Torin is an affordable choice which is its biggest selling point. Don’t get skeptical about its quality because it can be used for trucks and SUVs as long as the use is occasional, thanks to its high weight lifting capacity of 3-tons. The tool is comparatively lighter in weight and employs 360 swiveling casters which make it easy to move it around anywhere. However, mobility comes at the expense of durability. You’ll be good with it as long as you don’t subject it to frequent abuse of heavy lifting.

The bright side is, it comes with an extended neck for a breezy lifting of heavy vehicles like truck and Ford Explorer to a reasonable height. As a safety feature, it employs a locking release handle – making it safer to use. Besides, the inclusion of an overload protection valve makes sure the unit lasts longer.

With that being said, this floor jack can prove to be a dependable option for light work and occasional home use, courtesy of its high load capacity.

Pros

• Lightweight, portable and affordable.
• Maximum lifting capacity of 3-tons.
• Extra-long neck for lifting trucks and SUVs.
• The safety valve prevents overloading.
• 360swiveling casters for maximum mobility.

Cons

• Durability issues.
• Not suitable for frequent heavy lifting.

Bottom Line:

Despite the durability issues, the floor jack can prove to be a valuable option for on-budget buyers as it comes with high lifting capacity. This entry-level tool is suitable for occasional home use and smaller weight lifts.

5.   NOS NSJ0301 Aluminum Service Floor Jack

Who says a floor jack has to weigh like a truck to become capable of heavy-duty use? This service jack with aluminum construction is going to wipe all your misconceptions. Coming in a durable aluminum chassis, this weighs just 27-pounds, making it by far one of the lightest models available in the market. However, despite being lightweight, it packs the strength of a beast to lift a 3-ton weight to a considerable height of over 18-inches without flexing. Its dual-pump operation enables a user to rapidly lift the weight with less pumping.

Quality and longevity are definitely placed on top while constructing this tool. The safety valve avoids overloading to significantly extend the lifespan of the tool. Thick frame side plates and sturdy lift arm further contribute to the strength, torsion control, and durability of the tool’s chassis, making it a weapon of choice of professional mechanics and serious do-it-yourselfers.

In addition to durability and strength, the safety of your equipment undergoing maintenance is also its top priority which is made sure with a rubber saddle pad and foam handle cover – both of which protect your vehicle from dents and scratches. The 2-piece handle is easy to assemble and side handles make it extremely convenient to transport the unit around. Also, the metal wheels further add to the easy mobility of the tool. It’s not outrageously expensive nor is it insanely cheap. Falling in the middle of the cost spectrum makes it a dependable option.

Pros

• Durable and lightweight.
• Easy transportation with side handles and metal wheels.
• Maximum weight lifting capacity of 3-tons.
• Dual-piston to rapidly lift to a little over 18-inches height.
• Rubber saddle pad and foam handle cover to protect equipment from impact.

Cons

• Lift pad wears out over time.

Bottom Line:

This floor jack at this price proves to be a valuable tool for all those DIYers and professionals who want a quality tool in a lightweight construction that can offer reliable service while lifting heavy vehicles like trucks and SUVs.

6.   Pro-Lift G-737 Floor Jack

You cannot make a better choice than this if premium quality and high lifting capacity are your top priority. Despite being manufactured in China; the tool is a champion in lifting an impressive weight of 3.5-tons to an ideal load height of 22-inch and that also at once in 1 to 2 strokes. It comes with a rubber saddle pad to keep your vehicle protected from accidental impact while lifting it.

Like speedy lifting, load descent is also breezy due to the integrated universal joint release mechanism – offers absolute precision and control. Moreover, the rolled side frame adds strength and prevents the unit from twisting while lifting.

At 90-pounds, the tool isn’t the lightest to be easily carried around. However, it comes with rear swiveling casters that allow you to easily position it in any direction while working even on a rough surface. Plus, it also features a magnetic tool tray for keeping small parts or tools in one place for convenience.

Pros

• Ideal for heavy-duty use with a 3.5-ton lifting capacity.
• Speedy lifting to a maximum height of 22-inches.
• Rubber saddle to protect the vehicle.
• Rolled side frame for strength and keeping unit steady.
• Rear swiveling casters for easy positioning.
• Built-in magnetic tool tray.

Cons

• Couldn’t really find one

Bottom Line:

This floor jack provides exceptional services with its high load and speedy lifting capacity. Its heavy construction is compatible with heavy-duty use, making it a befitting choice for professional businesses and do-it-yourselfer mechanics alike.

7.   Powerbuilt 620516 U-Jack Floor Jack

Powerbuilt knows well how to add nifty features in a stylish design to make work and use of tool easy for the user without letting the price cross the affordability range. This U-jack is specifically designed for DIY enthusiasts who prefer doing repairs like brake jobs, tire change, and more on their own. Also, it saves you from the hassle of positioning a jack stand at the factory-approved lift point on your vehicle.

It comes in a unique fork shape lift saddle and open arm that accepts the mast saddle of any jack stand available in the market. You just need to jack up your vehicle; place the jack stand in the slot; lower and remove the U-jack. The vehicle will be resting securely on the stands. Easy-peasy, isn’t it?

Its solid build can withstand a total of 2-tons weight and raise it to a height of 18-inch which gives you enough clearance to easily slide under a car and work. 2-tons (4000lbs) simply means it can fluidly lift any vehicle like Audi, BMW, Mercedes Benz, Porsche, MINI, and Volkswagen.

The best part is, you can use it as a regular floor jack too – without requiring a jack stand. Its extra-wide frame will provide extra stability while raising the vehicle. Its affordability is the biggest selling point, but it doesn’t hurt to add a 1-year warranty in the equation too to make it more irresistible.

Pros

• Lightweight and affordable.
• Meets ASME standards of quality.
• U-jack can fit any jack stand.
• Maximum 2-tons capacity.
• Easy to use.

Cons

• It can’t be used for more than 2 tons capacity loading.

Bottom Line:

This floor jack comes in a stylish lightweight design at an affordable price and yet gives a dependable performance. Its maximum weight lifting capacity makes it compatible with a wide range of vehicles. The tool is ideal for weekend mechanics who prefer to do small repairs at home.

8.   Neiko Pro 20272B Floor Jack

This is a Hulk! The hefty price tag makes it clear that this beast isn’t for the fainthearted. Constructed from much envied industrial-grade aluminum, the floor jack is pleasantly lightweight yet can take a tough beating and still work like a charm.

It can lift a bulky weight of 3-tons and elevate it to a height of over 19-inches as easily and quickly as a hulk, thanks to a dual plunger design that rapidly lifts the vehicle to ideal maintenance height with less effort. Its low-profile compact design enables it to easily slide under any vehicle no matter how low the clearance is. For added security and protection of the tool, it comes with a preventative measure for overloading in the form of a safety valve.

To maintain its premium reputation, the tool features a rubber dotted saddle to provide a secure grip and also keep your vehicle safe from dents and scratches while lifting. In addition to that, it also profiles rotating rear casters for adjusting position under the vehicle. This premium grade tool takes its moniker very seriously therefore, it doesn’t look over any aspect of the user’s convenience. Double-sided handles make it easy to carry and transport anywhere.

It costs a fortune, but this long-time investment delivers a tool that provides auto repair services like tire change on sedans, SUVs, and racking cars not only in shops and garages but also in roadside emergencies.

Pros

• Long-lasting and lightweight construction.
• Dual plunger design for faster elevation.
• 3-tons load capacity is suitable for a wide range of vehicles.
• Rubber dotted saddle protects the vehicle from damage.
• Double-sided handles for easy carrying.
• Ideal for mechanic shops, garages, and roadside emergencies.

Cons

• Can be costly for some

Bottom Line:

This industrial-grade floor jack will put a dent in your pocket, but the long-term investment will give you a highly strong and well-built tool that will easily tackle a huge amount of load without flexing. Its highly versatile and lightweight design makes it equally suitable for auto shops and home use.

9.   JEGS 80077 Floor Jack

This is another high-end aluminum floor jack, which emphasizes more on lightweight portability, for your consideration. As is evident from the name, it’s a low-profile design which means it is best for tuning low-clearance vehicles like sports cars. Despite its lightweight chassis, the tool packs mighty strength to handle a load of 3-tons.

For a low-profile design, it can raise a vehicle to an impressive height of over 19-inches without flinching to give you enough room to freely work under a vehicle. Front rollers along with dual side handles will allow you to easily maneuver it and adjust the tool’s position while the wide track wheels will not only provide fluid movement but also keep the tool well-grounded. The rubberized lift pad with 360 rotation securely fits the vehicle and protects it from scratches during lifting. Also, wide chassis keeps the vehicle steady while lifting.

The tool itself is also protected due to in-built overload and bypass valves that prevent the overloading of the jack. In other words, at an affordable price, you’ll get a highly durable floor jack that will not corrode, rust, or lose its luster even after years of use.

Pros

• Durable, lightweight, and portable.
• The load capacity of 3-tons.
• Low-profile design with a maximum saddle height of over 19-inches.
• Rubberized lift pad for protecting the vehicle’s frame.
• Overload and bypass valves to prevent overloading of jack.
• Dual-sided handles and wide track wheels for easy maneuvering.

Cons

• Takes several pumps to raise an object to the ideal height.

Bottom Line:

If you’re willing to flex your arms’ muscles a little, then this high-quality and capacity floor jack at an affordable price will give you a reliable unit with dependable performance for many years to come. Its low-profile design makes it suitable for sports cars as well.

10. Pittsburgh Automotive Steel Floor Jack

Manufacturing a highly durable floor jack with an industrial-grade finish at an attractive price point is a feat that only a well-reputed brand Pittsburgh Automotive can excel at.

This super-tough floor jack has the toughness of a beast to easily handle the load of 3-tons. You’ll be left shell-shocked to see that it can lift such heavyweight to almost two feet above ground at supersonic speed – in just 3 1/2 pumps because of dual-piston Rapid Pump technology. You’ll also appreciate its universal joint release that offers maximum load control despite the position of the handle.

More impressive is its extra low-profile design that can reach under most vehicles including show cars. Its ultra-wide steel casters not only help in positioning the tool under the vehicle but also provide greater stability even over rough surfaces during work.

Another striking and noteworthy quality is the lightweight of the tool despite tough and sturdy construction, making it convenient for the user to carry it around with ease. Whether you’re a professional mechanic or a hardcore automotive aficionado, this premium-grade floor jack will not shy away from capturing your attention. It will last with you for years to come.

Pros

• Premium-grade, lightweight tool.
• Affordable price.
• Extra low-profile design.
• The maximum load capacity of 3-tons.
• Quickly lifts to a height of almost 2-ft.
• Ultra-wide steel casters for maximum stability.

Cons

• Doesn’t come with jack stands.

Bottom Line:

This industrial quality floor jack is a real treat for professional mechanics and automotive enthusiasts as it comes at an attractive price and yet offers high load capacity and lifting reach. Low profile design makes it further appealing due to its compatibility with low-clearance vehicles including show cars.

Buyer’s Guide: Choosing the Best Floor Jack in 2023

Figuring out which floor jack will work best for you is like solving a mathematics equation. Meaning, many factors are in play. So, taking help from a detailed buyer’s guide becomes indispensable to reach an error-free conclusion. Here is what you need to look for while selecting a floor jack.

• Load Capacity:

It’s all about lifting heavy objects like vehicles so weight capacity is the first and most important aspect that you need to observe. The options mentioned in the above list are dwindling between 2 – 3.5 tons of maximum weight capacity. lower weight capacity will of course cost you less, but will also offer limited use. The models with 3-tons or above load capacity are extremely versatile and can handle both big and small vehicles with equal efficacy.

• Size & Weight:

It’s common for buyers to prefer compact and lightweight tools mainly because they take less storage space and are easily transportable jacks. Many models on the list are compact and lightweight and yet don’t cut down on power and strength, like the Arcan ALJ3T floor jack. Aluminum-built floor jacks are hyper-durable and fairly lightweight that’s why they are the first priority of many automotive enthusiasts.

• Profile:

Many vehicles have low clearance which makes it very difficult for any floor jack to get under it and jack it up. Low-profile floor jacks have the added benefit of reaching under cars with as low as 4-inch clearance without difficulty. A low-profile jack is also handy to lift other objects beside vehicles.

• Jacking Height & Speed:

Like load capacity, floor jacks also differ from each other based on maximum lifting height and jacking speed. The tool that can raise a vehicle to a height of 18-inch or above is preferable as it gives enough room to easily slide under a vehicle and work freely.

Lifting a vehicle to an ideal height for straightforward maintenance requires pumping. Prefer a floor jack that can raise the load to maximum elevation point rapidly and with fewer pumps.

• Padding:

Finally, always prefer a floor jack that comes with a rubber or foam saddle. This thoughtful addition will not only protect your vehicle from scratches and dents during lifting but also keep it securely rested in an elevated position for as long as you’re working.

Conclusion

Now that you’ve gone through the reviews and buying guide it’s safe to assume that you’ll be in a better position to make the most informed choice and be rewarded with one of the best floor jacks for your use. The options given above can suit any buyer, the one restricted budget or the one whose only concern is to get a high-quality jack for a vehicle. There is one for everyone!

You May Also Like to Read:

• 10 BEST SCISSOR JACK 
• 7 BEST BOTTLE JACK 
• 10 BEST TRANSMISSION JACK 
• 10 BEST FARM JACK
• 5 BEST 2 POST CAR LIFT
• 5 BEST 4 POST CAR LIFT 

A floor jack is a good investment if your vehicle constantly needs to be lifted for repair and maintenance like tire change.

However, manual floor jacks not only make the job excruciatingly long and tiring but also ugly by often leaving marks on your car.

A single or 2 ton floor jacks are comparatively good but their use gets limited to light vehicles due to the weight capacity. In such cases, what you need is a strong 3 ton floor jack.

With their strong exterior and high lifting range, 3 ton floor jacks are capable of hoisting not just your regular small cars but also heavy vehicles like trucks and SUVs. Its aluminum body with a rubber padded saddle makes sure both your floor jack and vehicle stay scratch-free during the entire job.

The swiveling rear wheels make it easy for the tool to be fluidly slithered under the vehicle and lift it up.

Top 10 Best 3 Ton Floor Jack of 2023 Reviews

In the search for the best 3 ton floor jack, you can easily get confused due to the wide variety of available options. That daunting task has been made easier with this article that gives you a list of the top ten 3 ton floor jack available in the market along with a buyer’s guide.

1) NOS NSJ0301 Aluminum Service 3 Ton Floor Jack:

This floor jack has the strength of a beast packed in a compact design. It’s powerful yet compact body design makes it capable of lifting a wide range of vehicles from sports cars to trucks. The lift capacity is 6,000 pounds, which means the NOS NSJ0301 is rated at 3 tons. This durable floor jack delivers a lifting range from 3.75 inches to just a bit over 18 inches, which will be more than enough.

A reliable safety valve is designed in, along with dual-pump operation that improves the lifting speed. It delivers a lot in a considerably light weighted body, it only weighs 58 pounds. The small size makes it perfect to have in your car trunk for roadside emergencies or garage use.

The caster-style wheels help you maneuver this jack and you’ll get plenty of stability with the 4.5-inch lifting saddle. The durable wheels are of long-lasting metal that will not succumb to death under high weight.

In addition to the main body of high-grade aluminum, this jack has a rubber saddle pad as well as a convenient side handle to make it easy to carry. It also comes with a universal joint design for you to have maximum control. The two piece handle design has a foam pad for the protection of your vehicle from accidental scratching or denting.

Pros

• Rubber saddle pad
• Side handle for easy carrying
• Lightweight as compared to others
• Foam handle
• Compact in size
• Large lifting capacity

Cons

• Not any

Bottom line:

If you want a floor jack that is able to lift your heaviest vehicles with ease, stores high power in a good, compact, lightweight body, and light price tag, then this strong beast is your safest choice.

2) Powerzone 380044 3 Ton Floor Jack:

The Powerzone 380044 Floor Jack is a treat for mechanics given its 3 ton weight capacity, strong body, and nifty features. With this weight capacity, you can lift any automobile measuring up to 6,000 tons. To keep the floor jack from being overloaded and causing havoc, the manufacturers have fitted a safety valve that keeps the weight in check.

This powerful floor jack comes with a minimum height of 4 inches. This height is enough to lift some low-profile cars. Moreover, it features an impressive lifting range of 14.75 inches which takes the jack to a height of 18.75 inches which gives you more than enough room to work with. To achieve this height in the shortest time, this Powerzone floor jack features a dual cylinder quick lift mechanism.

This floor jack is made from a perfect combination of steel and aluminum and features a shiny professional finish. The top finish not only gives it an appealing look but also provides protection from rust. The edges of the floor jack are rounded for safety purposes while the lifting pad is rubberized to improve on the grip as well as help to protect the vehicle being lifted.

Its rear caster wheels are designed to swivel enabling ease of repositioning. Even better, however, is the fact that they are made from steel further enhancing their durability and strength under heavyweight.

Pros

• High weight capacity
• Aluminum frame
• Quick lift hydraulic mechanism
• Rubberized saddle
• Portable Floor Jack
• Rotating wheels

Cons

• Not any

Bottom line:

The lightweight nature, along with other features makes it portable and best suited for persons looking for a handy tool for lifting a heavy truck or car while on the road.

3) Arcan ALJ3T 3-Ton Floor Jack:

This floor jack arrives with a strong body and protective features that are bound to ease your job by making your operation safest and quickest. This Arcan professional-quality aluminum built jack has a 3 ton lift capacity and a 3 ¾ inch minimum lift height for easy access under low profile vehicles.

This beast starts weaving its magic with the dual-action pump pistons that quickly bring the two-stage jack to its maximum height. Each piston is equipped with protective gear and has a special dust shield to prevent hydraulic contamination and keep the pump operating smoothly. The long two piece handle delivers the leverage you need and then breaks down for easy storage. The quick lock feature provides easy engagement and disengagement of the handle halves.

This floor jack has think side plates and a reinforced lift arm for maximum toughness. The exceptional construction provides added strength and durability. The jack also features bypass and overload valves to prevent overextension of the hydraulic ram, safely keeping you from using the jack beyond its rated capacity.

No matter how powerful the jack is, using it will become a headache if it does not come with wheels to easily slide it under the vehicle. That is not the case with this beast. The strong yet lightweight jack comes with rear swiveling caster wheels and wide track front wheels for superior stability and smooth-rolling performance that helps you easily position the unit right where you want it.

Pros

• Portable
• Strong aluminum build
• Lightweight
• Piston pumps have shields
• Low profile
• Thick frame
• Swiveling caster wheels

Cons

• Not any

Bottom line:

If you want a floor jack that gives you the power of a pro in a light-weighted, compact body then get your money and hands-on this one immediately.

4) Big Red Torin T83006 3 Ton Floor Jack:

This floor jack comes with bearing functions that will not just make your job easy but will also be gentle with your vehicle. You do not want a floor jack that lifts up your truck only for it to slip and fall on you, damaging the vehicle and endangering your safety. It will lift the vehicle up and hold it in that state till you lower it yourself.

It has a 3 ton capacity meaning it can lift up to 6000 pounds which makes it great for your trucks, SUV’s and other vehicles. It can easily lift the vehicle from 6 inches to 21 inches.

What sets this beast apart from other floor jacks on the market is the fact that it comes with a long neck. With most floor jacks, you have to pump the neck up to lift your vehicle but not this boy. It has a detachable 3-inch neck which simplifies the entire process. This reduces the amount of time and energy you spend on pulling the lever.

When you want to position a jack under a vehicle, maneuverability is crucial. You need strong wheels on your tool that will neither dent, nor fall off. That is why this floor jack features 360 degrees swiveling wheels for easy mobility. They eliminate the time it normally took you to drag the jack out while heaving. It comes with a safety bypass feature that will prevent overloading over the jack.

Pros

• Detachable neck
• High load capacity
• Strong body
• Lightweight
• Safety bypass feature

Cons

• Not any

Bottom line:

For the price and the features, this floor jack is a really good investment. It will last you many years without the functionality being compromised.

5) Neiko Pro 20272B 3 Ton Floor Jack:

This production by Neiko is made to help you easily lift your vehicles and to replace the old, junk floor jack that you have in your garage. It is constructed from durable industrial-grade aluminum alloy that gives it an extremely strong exterior. Even with a strong and durably build design it is still much lighter in weight as compared to other jacks available in the market.

The lightweight design does not come in the way of its usage. It comes with high lifting capacity of up to 6000 pounds meaning it can easily lift up to 3 tons without succumbing to death. Its dual plunger structure provides quicker and more efficient lifting from 3 ¾ inches to 19 ¼ inches. It is ideal for tire changes and auto repair services on sedans, SUVs, and racking cars in shops, garages, or to e kept in a car for roadside emergencies.

It has swivel rear caster wheels to be easily carried in and out of the garage and easily positioned under the vehicle. The wheels are strong enough to withstand the weight of the vehicle when it is lifted.

To top all these amazing functions off, it comes with a safety valve for protection from overloading. If your floor jack will be loaded beyond its capacity, it will automatically release some of the pressure to not be damaged.

The rubber dotted saddle pad will provide protection to your vehicle’s frame from any scratches or dents. Trust me, you do not want a jack that lifts the vehicle easily, for your job but leaves behind its marks!

If you thought that was all then you are in for a surprise, it also has dual handles on the sides for being carried easily. You get heavy-duty performance in such a light body that also comes with handy designs.

Pros

• Durable aluminum construction
• Safety valve feature
• Easily maneuverable
• Rubber saddle
• Good price
• Swiveling wheels
• Dual handles

Cons

• No carrying loops

Bottom line:

This floor jack is ideal for both home users and professional mechanics due to its high lifting capacity, in a very lightweight user-friendly design.

6) Jegs 80077 3 ton floor jack:

This low profile floor jack by Jegs is good news for those mechanics who are tired of their old floor jack that not only is incapable of lifting much weight but also has the issue of accidental slipping. Worry not; this floor jack will have your back when you have to work on your vehicle. The durable aluminum construction gives it a rugged exterior that is able to withstand rough use and will not give up on you or your vehicle. Even though it is pretty light in weight, its lifting capacity is anything but light. It can lift up to 3 tons of weight which is an insanely large amount and guess what; it will do that without you having to worry about the jack slipping from under the vehicle!

It has a low profile pad height that allows you to quickly and accurately place it under the vehicle. This 3 ton beast has a minimum saddle height of just 3 ½ inches which is good for low clearance vehicles and a maximum saddle height of 19 ¼ inches which is more than enough to provide plenty of working room. The saddle rotates 360 degrees and has a rubber pad present on it to protect your vehicle from scarring up.

The dual side handles, along with the wheels not only simplify moving the floor jack but also ease the job of positioning it under the vehicle.

Last but not the least; it has a protective seal to keep the hydraulic system secure and have the jack-up and running easily without any setbacks.

Pros

• Lightweight
• Rotating saddle
• Rubber lifting pad
• Protective seal
• Handle comes with sleeve
• Aluminum construction

Cons

• Makes little squeaking noise

Bottom line:

If you are looking to make a long-time investment in a floor jack that will last you many years, while offering you optimum performance along with added comfort and precautionary features, this is the one for you.

7) Pittsburgh Automotive 3 Ton Floor Jack:

This floor jack by Pittsburgh is strong to do everything, you do not need to worry even a little bit, just hook it in its place and let it take care of the rest for you. Its super tough precision welded construction with an industrial-grade finish is what gives it the ability to hoist your vehicle.

It has a lifting capacity of 3 tons, which means it cannot just lift your light vehicles off the ground but will also lift many of your trucks and SUV’s too like a piece of cake. This heavy-duty 3 ton car jack is capable of getting your vehicle almost two feet off the ground.

The dual piston rapid pump technology makes sure you do not need to exert a lot of energy into pumping the lever, it can pump it off the ground with just a few pumps. The universal joint release provides precise load control in any handle position. It has an extra low profile to get it under your low vehicles too. All these features make sure your floor jack can do more without the risk of failure.

It may be a bit heavy than its competitors but Pittsburgh took care of this problem by adding extra-wide steel caster wheels. Furthermore, this has a convenient foot pedal that allows pumping with ease. It also features a knurled aluminum handle that has a good grip. The cherry on top of all these functions is that it houses a foam bumper to protect your precious vehicles from scratches and marring.

Pros

• Wide steel casters
• Large weight capacity
• Affordable
• Strong construction
• Knurled aluminum handle
• Rapid pump
• Aluminum handle
• Foam bumper
• Foot pedal

Cons

• Heavy in weight

Bottom line:

If you are looking for a floor jack that does a lot at a comparatively low price, then invest your money in this one. Although it is a bit heavy in weight, that does not affect the fact that it is capable of successfully lifting almost 3 tons of weight.

8) Liftmaster 3 ton Floor Jack:

Liftmaster have introduced a floor jack that will have you astounded by its amazing performance. The feature which sets this one apart from the gang is that it only weighs 20 pounds and yet is still capable of lifting 3 tons of weight! How insane is that! The weight also makes it convenient for you to keep this in the trunk of your car; it will come in handy for roadside emergencies.

The lightweight in no way means cheap to build. It is made from a heavy gauge steel frame that ensures strength and durability. Also, the body frame is manufactured from steel rod iron which is much rigid than conventional materials. As the materials are rust-resistant and corrosion-resistant, you can use them in any weather, even in the rain or the snow without worrying about damaging the jack.

It is a low-profile floor jack which means it is capable of slithering under your low vehicles as well as your regular heighted vehicles. It is capable of lifting standard-sized cars from 7 inches to 21 inches off the ground.

Moreover, this ultra-low-profile floor jack comes with an adjustable saddle that can be swiveled a full 360 degrees. The saddle has a rubber protective pad on it to keep your vehicle insulated from scratches and dents. Do not even worry about releasing the pressure and dropping your car on the ground accidentally, it has a release valve that helps to release the pressure quickly and safely place your car back on the ground.

In addition to all these good features, the best news is that you get this floor jack at an affordable price. Though the price is lower, it never compromises the quality.

Pros

• Affordable
• Lightweight
• Swiveling saddle
• Dual pump
• Bumper pad for protection
• Aluminum handle
• Portable
• The universal joint release mechanism

Cons

• Lift range is low for large vehicles

Bottom line:

If you need a low-profile floor jack with versatility and compatibility, this Liftmaster is an incredible choice. It helps to lift your vehicles faster and easier with its strong yet extremely light body and comes with a very reasonable price tag.

9) Hein-Werner HW93652 3 Ton Floor Jack:

This floor jack features a heavy-duty frame to keep the jack intact and working even during rugged applications. It is able to lift up to 3 tons of weight. The strong exterior along with the high weight capacity makes it ideal for trucks, SUV’s and your other heavy vehicles. The flanged side plates increase the strength of your floor jack.

It comes with a removable, one-piece handle that you can easily attach and detach from your floor jack. The handle gives a very firm yet comfortable grip. The pump base has an iron cast on it that adds durability and stability to its design.

The wheels present on this beast are strong enough to make maneuvering and positioning very easy for you. Taking it out of the garage will not give you a hard time; you can easily pull it out with the wheels rolling smoothly.

Other nifty features this boy has included a cast-iron lift arm for your heavy-duty loads and the u-joint release mechanism for precise load control.

The pressure release valve not only ensures you do not overload the floor jack but also releases the pressure evenly without hurling your vehicle straight to the ground.

Pros

• Removable handle
• Sealed pump to reduce risk of damage
• Cast iron lift arm for heavy-duty loads
• Universal joint for precise load control
• Flanged side plates

Cons

• Handle is shorter

Bottom line:

Get your hands on this floor jack if you are looking for a tool that will have your back in your time of need, with its strong body and high lifting capacity.

10) OTC (5303) Stinger 3 Ton Floor Jack:

This floor jack, manufactured by OTC, is the tool that you need if you frequently face flat tires or need to make other repairs to your vehicle. With its strong yet compact body and high lifting capacity, it will prove to be a worthy investment. Its light, compact design makes it easy and convenient to use.

The lightweight does not affect its service in any way, it is capable of lifting 3 tons of weight. It can lift the vehicle from 5 ¾ inches to 18 ½ inches. A flanged upper body edge increases strength to resist twisting.

It comes with a built-in safety overload system that prevents use beyond its capacity and sturdy pair of rear swiveling caster wheels that make the tiring process of dragging it out of storage and positioning it under the vehicle a piece of cake. The wheels are strong enough to withstand even the weight of your vehicle. The saddle has a rubber pad over it to prevent your vehicle from accidental scratches and dents.

Pros

• High lifting capacity
• Flanged upper body
• Rubber pad
• Safety overload system
• Rear swiveling casters

Cons

• A bit heavy in weight

Bottom line:

Invest your bucks in this floor jack if you do not mind a bit heavy-weighted tool, although the weight does not come in the way of its functionality.

Buyer’s Guide: Get the Best 3 Ton Floor Jack in 2023

Any kind of work related to your car for instance tire replacement is going to be impossible without a good floor jack that is able to lift up your vehicle and then securely place it back on the ground. Light floor jacks can only give you a hand with a couple of your light vehicles and will not be able to lift just every vehicle. For that, you need a good 3 ton floor jack that will not just lift your standard vehicles but also your trucks and SUVs, etc.

3 tons floor jacks have proven to be a good investment for many reasons and a few of them are that it can help you with several vehicles, does not cost much more than a 2 ton floor jack, and comes in a compact yet strong body. But a 3 ton floor jack is a hefty, one-time investment that you need to make very carefully to not have your money and time be spent on a fraud tool. Along with a waste of money, it will also be life-endangering for you to work with a faulty 3 ton floor jack. There are a few points that can help you with this issue.

1. Jacking Speed:

There are floor jacks that work rapidly and will lift a vehicle as high as possible in just a few pumps of the jack handle and there are also those floor jacks where it seems you pump and pump but they only rise up a little at a time. You do not want the latter especially when you are stuck on a stranded road and need to change the tire. So the speed of the jack should definitely be checked before you buy it.

2. Wheels:

This may not seem like a big deal, but the floor jack weighs a lot. Now imagine dragging a floor jack out of your garage towards your vehicle and then forcefully pushing it under the vehicle. That sounds tiring, which is why the presence of strong wheels on a floor jack is very important.

3. Exterior:

Floor jacks have to be built very sturdy in order for them to be able to handle the rigors of the job. Steel built jacks and strong but steel adds a lot to the weight of the jack, on the other hand, aluminum gives strength to the floor jack without adding weight but adds bucks to the price tag of it. Look for a floor jack that is made of a combination of steel and aluminum for both a good price and average weight.

4. Weight:

The weight of a floor jack is very important. Even if your floor jack offers good service, its use will be limited to the garage only if it weighs a hundred pounds! You cannot carry so much weight in the trunk of your car, so look for a floor jack that offers good service with a light and compact body.

5. Price:

Price is a factor that may not be important for some people, and crucial for some others. If you are not on a budget then aluminum-built floor jacks are the best option for you, but if you are looking for a budget-friendly floor jack then invest in ones that are either made of pure steel or a combination of steel and aluminum.

6. Highest lift height:

You also need to know how high your 3 ton floor jack can lift. The average lift range is around 18 to 20 inches from ground level, if it is any lower than that they do not invest your money in it. You need a jack that can lift your vehicle the highest to ensure that any occurrence will be covered.

Conclusion:

A 3-ton heavy-duty low profile steel floor jack will help you accomplish so many tasks from the comfort of your home. You will also save on the trips and money that you usually spend at the mechanic’s shop. Read the above-mentioned list of some of the best 3-ton floor jacks, along with the buyer’s guide to know which one is most suitable for you.

You May Also Like to Read:

• 10 BEST SCISSOR JACK 
• 7 BEST BOTTLE JACK 
• 10 BEST TRANSMISSION JACK 
• 10 BEST FARM JACK
• 5 BEST 2 POST CAR LIFT
• 5 BEST 4 POST CAR LIFT 

Being a car owner what more do you want from your floor jack than a lot of lifting power and weight capacity incorporated in a small body. This is exactly what a 2 ton floor jack provides you.

The lightweight and compact body of a 2 ton floor jack makes it ideal to be kept in the car trunk without any trouble. A 3 or 4 ton floor jack may give you more lifting range and higher capacity but they come with heftier price tags and heavier bodies which is why they cannot be stored in a car trunk.

With its strong steel or aluminum body and 4000 lbs weight capacity, a 2 ton floor jack will hoist your vehicle in the air and will keep it there stably till you decide to put the vehicle down. Its lifting range provides sufficient clearance for you to easy slide underneath a vehicle and do your job. Sturdy handle together with strong wheels gives you smooth steering in your desired direction or position.

Top 7 Best 2 Ton Floor Jacks of 2023 Reviews

Purchasing a 2 ton floor jack requires a lot of search to prevent investing in a dump. We have eased that task for you by providing you a list of 7 best 2 ton floor jacks available in the market along with a buyer’s guide.

1) Pro-Lift F-767 Grey 2 Ton Floor Jack:

This floor jack by ProLift comes with functions that every car owners wants to have in their car jacks. Weight capacity, portability and lifting range, it has all these features in a sturdy heavy duty steel body that will retain its shape even when under weight. The cherry on top is the fact that it is low profile so it can easily slide under those low clearance vehicles present in your garage, that often require a separate floor jack.

It has weight capacity of 4000 lbs so do not even worry about the tool not lifting heavy weight, it can easily lift your vehicles like Sedans, Chevrolets etc. With its lifting range of 3 inches to 14 inches, you will have enough room to do all the repairs and maintenance jobs.

Its other handy features include the easy to grip, removable handle that will allow you to easy and comfortably move the jack around the car and a strong pair of wheels that will make maneuvering a piece of cake. Wheels are strong enough to withstand the weight of the vehicle when the floor jack is being used and the rear wheels can rotate which makes changing directions very easy.

The best features this beast has are its safety features that include a bypass and safety valve. The bypass device fitted to the arm will protect the jack from over-pumping and the built-in safety valve will provide over load protection. Lastly, to keep all these features working perfectly for a long time, the floor jack has a top coat which keeps it protected from rust.

Pros

• Weighs 30 lbs
• Bypass device to protect from over-pumping
• Safety valve
• Can also be used for low profile vehicles
• The top coat protects from rust
• Strong wheels
• Heavy-duty steel construction

Cons

• No rubber padding on the lift
• Coat may peel with excessive usage

Bottom line:

This 2 ton floor jack is a treat for those car owners that have to deal with small vehicles and low profile vehicles. With its sturdy construction and high weight capacity, this tool will help you solve the repair problems very easily.

2) Arcan 2 Ton Floor Jack:

Arcan knows what a car owner needs and has included all of that in a very compact design. This floor jack comes with the weight capacity of 2 tons which means it will lift our small vehicles very easily and not just your small vehicles; its low clearance design makes it ideal for the vehicles that are low in profile.

This floor jack has heavy-duty construction; its aluminum frame makes it able to withstand rough uses and adds to the longevity of the tool. It has dual piston pump which means it is going to take only a few pumps to get your vehicle up and high in the air! You will not need to exert extra energy.

Let’s talk about the handle and the wheels of this boy. It has a two-piece handle that can be pulled apart very easily for storage and then put back in place when using the tool. There are also handles on the side of the jack, with bumper pads for easy picking and comfortable use. The wheels on this boy will let you drag it around the garage and underneath the car, without any trouble.

What keeps you in control of your floor jack is its universal joint release mechanism that lets you easily operate the tool from any direction. On top of all the features, there is a safety valve that prevents overloading on the jack.

Pros

• Costs 132$
• Dual piston pump
• Steel wheels
• Universal joint release mechanism gives control
• Safety valve to protect from overloading
• Strong construction

Cons

• Heavy in weight, 67 lbs
• Drop valve is a little tight

Bottom line:

This is a budget-friendly floor jack loaded with high lifting capacity and many other handy features ideal for those who are looking for low priced floor jacks.

3) TONDA Floor Jack, 2 Ton:

This Tonda floor jack will help you immensely with repairs regarding your vehicles by easily hoisting them up in a few minutes only and keeping them stable in the air. It weighs 16 lbs and is compact enough to be easily stored in your car or carried from one location to another.

With its weight capacity of 2 tons, you will not have to keep an extra floor jack around in case this one does not lift, because it will lift!! The weight capacity makes it suitable for sedans and coupes.

The best part is you only have to pay a fraction of its competitors to get your hands on this floor jack. You get a strong tool with sturdy steel construction in only 38$! To keep the strong construction intact even after years of use, it has a rust resistant coat that will give it durability and longevity.

Its lifting height range goes from minimum 4.9 inches to maximum 11.8 inches which may not be much but it is enough to provide you room for repairs. There is a built in safety valve that will prevent over loading by automatically shutting down the tool when it reaches its maximum height capacity.

It arrives with large wheels with the back ones swiveling, that will take care of moving the floor jack from one place to another. It will also make the job of positioning the jack under the vehicle very easy.

Pros

• 1 year warranty
• Costs 35$
• Large wheels
• Weighs 16 lbs
• Portable
• Sturdy steel construction
• Rust resistant

Cons

• Hydraulic start leaking oil after a few uses
• Lifting height is suitable only for tire change

Bottom line:

If you are looking for a small and compact floor jack that you can easily keep in your car, has a good lifting range then look no further and invest your bucks in this one. You will not have to spend a huge amount, it is very affordable.

4) Powerzone 380033 2 Ton Steel Floor Jack:

Whether it is a floor jack, scissor jack or any other tool for cars, Powerzone has always introduced handy models to make vehicle repairs and maintenance jobs very easy and convenient. This model is no different than the rest. It comes with a sturdy, steel body that will tolerate harsh weather conditions, if faced and will retain its shape and functionality even after years of operating.

It has a rated capacity of 4000 lbs (2 tons), which makes it easier for you to lift your Sedans, Coupes and low vehicles like Chevrolets. The lifting range goes from 5 ¼ inches to 13 inches, providing you enough to room to tinker in your car.

Really good inclusions by the company are safety features and this one has them. It has a safety valve which will keep the floor jack safe from overloading beyond its rated capacity. In the end, it has strong pair of steel wheels that make portability very easy for you by letting you easily roll the jack and take it wherever you need to. It also makes the job of positioning the jack under the vehicle very easy.

Pros

• Lightweight, 19 lbs
• Costs only 38$
• Weight makes it portable
• Lifts 4000 lbs
• Sturdy steel construction

Cons

• Makes noise when lowering the vehicle
• Does not come with a hydraulic adjuster
• Not for low profile vehicles

Bottom line:

Invest your bucks in this floor jack if you are looking for a 2 ton capacity jack that falls in budget friendly category. Its lightweight and compact design adds to portability and convenient use.

5) Powerbuilt 620479E 2 Ton Floor Jack with Safety Bar

This low profile 2 ton floor jack by Powerbuilt has everything a car enthusiast or a mechanic dreams of having in their car jacks.

It comes with 2 tons weight capacity which means it is perfect for your small everyday vehicles like sedans and coupes and its low profile factor makes it suitable for your low clearance vehicles like convertibles. This boy will have them up in the air without you having to go through extra lengths or without causing any fatigue. The best part is it does the job of lifting 2 tons weight whilst weighing only 7 lbs itself!

It raises the vehicles from minimum 2 ¾ inches to maximum 15 ½ inches, it gives you enough room to slide under the vehicle and do the repairs or change the tire. A really good inclusion in this floor jack is that it includes a steel safety bar that slides under the lift arm to secure the jack in the topped-out raised position.

Its strong steel exterior ensures you get to use this boy for years without any problems arising.

Pros

• Extremely lightweight, 7 lbs
• The maximum lifting height is 15 ½ inches
• Can be used for small cars
• Suitable for low profile vehicles too

Cons

• Misalignment due to slightly loose screws
• Handle connection is weak

Bottom line:

If you need a strong floor jack that will hoist up both your heightened as well as low-profile vehicles, then this floor jack by Powerbuilt is the ideal model for you.

6) Hein-Werner HW93642 Blue Hydraulic 2 Ton Floor Jacks

Hein Werner has outdone themselves with this floor jack. This production of theirs is perfect for your light vehicle needs because of its 2 tons weight lifting capacity. It has a strong and wide steel constructed frame that ensures your jack does not bend and break when it is under the weight of vehicle. The flanged side plates add more to the strength and durability of this beast.

It has lifting height range of minimum 4 ½ inches to maximum 20 ¼ inches which will give you more than necessary space to not only change your vehicle’s flat tire but also slither under the body if any repairs are in order.

It also has protection feature which include a pressure relief valve that prevents the jack from overloading. This tool weighs a bit more than its competitors which is why it is accompanied by strong and large wheels that will make moving it so much easier. The back wheels are swiveling caster wheels which add more to convenient maneuverability. The long 50” handle is easily detachable; once you are done with the job you can remove it easily for storage.

That is not all; this floor jack also features a u-joint mechanism for precise control over the load and a cast-iron lift arm which will proof to be a helping hand when dealing with heavy-duty loads.

Pros

• Maximum lift height is 20 ½ inches
• Sturdy steel construction
• Flanged side plated offer extra durability
• Detachable handle
• Pressure relief valve

Cons

• Weighs 99 lbs
• Slow jacking speed
• Does not arrive with oil

Bottom line:

This beast floor jack is ideal for those who want a strong tool that can lift heavy loads easily, has safety features and user-friendly design.

7) JEGS 80006 4000lb 2 Ton Floor Jacks Garage Car Truck:

Being a car owner, nothing is more important than having strong tools in your car that will come in handy during some roadside emergency. This is exactly what Jegs has given you in this floor jack, a strong tool that will not give up on you. It is made from aluminum so know that it has a really sturdy exterior that will hold out against rough uses, the strong exterior also gives it strength to not just lift heavy weights but also keeps them stable in the air.

It is capable of lifting 4000 lbs of weight which makes it perfect for your small garage vehicles. The lifting height goes from minimum 3 ½ inches to maximum 19 ¼ inches, providing you sufficient amount of space to slide underneath the car. The low minimum height makes it suitable for low clearance vehicles too.

Other features include a 50 inch long two-piece handle that will give you the control to steer your floor jack. The two-piece handle design is ideal because it makes storage so much easier. The dual handles on the sides also aid in simplifying maneuvering.

The hydraulic lift has a rubber coat on it to prevent both the tool and the vehicles from marring and scratching.

Pros

• Aluminum exterior
• Rubber pad on the lift
• Maximum height 19 ½ inches
• Can be used for low clearance cars too
• Two-piece handle

Cons

• Weighs 50 lbs
• Hydraulic lifts slowly

Bottom line:

Whether you are a professional mechanic or a car enthusiast, this floor jack will meet your all needs by hoisting your small garage vehicles easily in the air.

Buyer’s Guide: Buying the Best 2 Ton Floor Jacks in 2023

2 ton floor jacks are a crucial tool to have, for a car mechanic or enthusiast due to their ability to lift more with small body. They make your repair and maintenance jobs easier by hoisting the vehicle up and keeping it stable while it is in the air. This is the reason why you cannot trust every floor jack available in the market. A bad floor jack will not just damage your vehicle but may put your life in danger as well.

We have made a list of some of the points that will keep you away from purchasing a floor jack unsuitable for your vehicle.

1. Weight:

If you need to keep the floor jack in your car then trust me this factor is crucial for you. No matter how good the jack operates, you will not be able to keep it in your car all time if it weighs like trucks. If you are going to keep the floor jack in your garage then this factor may not affect your purchase.

2. Construction:

Checking the construction of a floor jack is very important. Floor jacks have to lift vehicles and hold their weight so they need to be as strong and sturdy as possible. The strength only comes from a durable construction so make sure the floor jack you are investing your bucks in has a durable steel or aluminum construction.

3. Price:

Prices of floor jacks vary. The more their capacity, the higher will be their price. If you are looking for a floor jack in budget-friendly price, then go for ones that have steel construction instead of aluminum, as aluminum ones are a bit more expensive.

4. Warranty:

It is an investment that you surely want to have for a couple of years, if not lifetime. So it is only fair that it arrives with some form of warranty from the company. If it has warranty then in case anything happens to the tool you will not lose your money.

5. Jacking speed:

There are floor jacks that operate efficiently and raise a vehicle as high as possible with only a few pumps of the jack handle and there are also floor jacks where they seem to be pumping and pumping but just a little at a time.

6. Wheels:

Floor jacks weigh more than scissor jacks and thus are quite hard to move around. This is the reason a floor jack always has strong pair of wheels to make it easy for you to use the tool. Make sure the wheels are of strong steel so that they do not break when put under weight.

7. Lifting capacity:

Lifting capacity is another important factor to check in your 2-ton floor jack. You do not want to be stuck with a floor jack that only lifts 5 inches. Go for ones that have a maximum lifting height of more than 14 inches.

Conclusion:

A strong floor jack lets you do any job regarding car repair or maintenance very easily and successfully. The article above has a list of some of the best 2 ton floor jacks available in the market. To be sure you are spending your money in a good floor jack; go through the buyer’s guide before making a purchase.

You don’t have to actually transform into hulk or ironman to lift tons of weight, especially of a vehicle while doing repair or simple tire change. Floor jacks do that heavy lifting for you.

However, your beastly strength floor jack becomes as good as trash when you’ve to work with a low-clearance vehicle that’s almost kissing the ground. In such a troubling situation, only a low profile floor jack can be of service.

A low profile floor jack can slide underneath dropped vehicle due to its low minimum lift range and easily lift it to a considerable height with the help of a durable lift arm and padded saddle.

All this tough weight lifting is made possible because of high-grade steel or aluminum construction. You’ll not need a crane to transport and position the tool for work mainly because most top-rated models have enforced durable handles and wheels for easy maneuvering.

Top 10 Best Low Profile Floor Jack of 2023 Reviews

As there’s a jungle of low profile floor jacks out there and we don’t want you to get overwhelmed and lost in a wide range of choices. Therefore, for your convenience, we’ve compiled a list of 10 of the best low-profile floor jacks for your convenience. Evaluate their strengths and weaknesses and decide which model is best for your needs.

1.   Pro-Lift F-767 Low Profile Floor Jack

Pro-Lift F-767 floor jack is a depiction of real craftsmanship due to its heavy-duty steel construction with many noteworthy features at an affordable price. Despite the tough build, the tool is light in weight and yet can support a maximum weight of 2-tons. The tool can withstand rough usage and yet provide safe operation due to built-in safety valves that prevent overloading and over-pumping.

Its extra-low profile contains the actual charm, allowing the tool to easily slide under vehicles with less than 4-inch clearance for lifting. The model employs a rapid pump which can lift a vehicle to a height of 14-inches in just a few seconds. This might not be the ideal lifting range, especially for high vehicles, but the tool still holds itself pretty well for casual use like rim or tire repair. However, the actual caveat is that the lifting handle doesn’t incorporate foam or rubber padding to keep your vehicle protected from scratches and dents. So, you’ll have to be extra careful while working with it.

However, looking at its cheap price, the tool is a worthy investment for home use and those car enthusiasts who prefer to do minor repair jobs on their own.

Pros

• Long-lasting construction.
• Affordable price.
• Faster lifting.
• Extra low profile.
• Ideal for home use.

Cons

• Handle doesn’t have padding.
• Maximum lifting range isn’t suitable for higher vehicles.

Final Thought:

Despite the limited 2-ton weight capacity and below-average lifting range, this floor jack is a worthy investment especially for home use due to its heavy-duty construction and extra low profile. The tool offers excellent value for money with its safe and easy operation.

2.   Performance Tool W1645 Low Profile Floor Jack

This floor jack is a superhero in disguise. Its tough steel construction makes it nearly indestructible which means the tool can take some real abuse and yet lift weight effortlessly unless you smash it with Thor’s hammer. Its superhero-like strength is evident from its impressive weight lifting capacity of 3.5-tons (7000lbs). Meaning, whether its lifting a low profile show car or a sizeable truck, the tool has the strength for it. However, all this steel and strength make it heavier than an aluminum-built model with the same capacity.

For a low-profile jack, this can smoothly raise a vehicle 20.5-inches above ground – giving enough room to work freely. Lifting such load to such elevation is completely safe with this jack as it features an overload protection valve. It’s also quick and requires half the number of pumps to lift a vehicle due to the double-pump mechanism. Despite it being a less known brand, the tool actually knows how to give high-end models a run for their money by employing swiveling cushioned saddle and rotating rear wheels that make it easy to maneuver and position the tool even in a confined workspace.

All in all, the tool might not be suitable for rigorous use in a professional workshop, but it surely knows how to keep those serious DIY mechanics satisfied who love to maintain their own cars.

Pros

• Durable and compact.
• 5-tons load capacity.
• Can lift to an ideal height of 20.5-inch effortlessly.
• Swivel cushioned saddle and swivel rear wheels for easy maneuverability and positioning.
• Ideal for low clearance cars and light duty trucks.

Cons

• Not suitable for professional auto shops.

Final Thought:

This low profile floor jack with heavy-duty steel construction is a blessing in disguise for those serious DIY mechanics who want to have a sturdy floor jack with enough strength to lift a heavyweight to a considerable height without flinching.

3.   Powerbuilt 620479E Xtra Low Profile Floor Jack

Nothing can describe this floor jack better than this single word: “Quality!” Indeed, it’s an on-point description of quality construction. It takes an edge over the previous two models discussed above with its minimum lift range of 2 3/4-inch which means it can sneak under even those vehicles that are almost kissing the ground – any stock or modified vehicle.

If you’ve to work with a unibody vehicle, it can handle that too. This floor jack doesn’t come with jack stands, instead, it has a safety handlebar. Just jack the vehicle to your desired elevation point and install the safety arm under the lift and voila! You can slide under the vehicle to work.

Its beefy construction can handle a weight of 2-tons and easily lift it to a little over 15-inches in height. The maximum range isn’t ideal, but you can work around it considering the flexibility this tool offers with its exceptionally low minimum lift range. You’ll also like its swiveling casters that offer maximum maneuverability even on a rougher surface.

With that being said, it’s a captivating option for personal and professional workshop use, especially due to its heavy duty construction and affordable price.

Pros

• High-quality build at an affordable price.
• Very low minimum lift range.
• 2-tons load capacity.
• Ideal for personal and professional use.
• Safety handlebar eliminates the need for a jack stand.

Cons

• Maximum lift range isn’t ideal.

Final Thought:

For an affordable price, this low-profile floor jack really gives bang for bucks. The tool is sturdy enough to tackle stock or modified vehicles without difficulty. Despite its less maximum lift height, it’s a reliable option for personal as well as professional garage use.

4.   Liftmaster Low Profile Jack Ver.2

When the name itself says Liftmaster then have faith in the tool to easily lift a heavyweight of 2.5-tons like a champion. Its heavy-duty steel construction is the main reason behind such strength and sturdiness. The tool can last for years without falling apart even after frequent tough use unless thrown under a freight train.

With a lifting range of 3.15-14.5 inches, the tool can easily reach underneath vehicles having less than 4-inch clearance and raise it while swiveling wheels provide better maneuverability for adjusting the position of the jack. The highlight of the unit is its improved hydraulic pump that will lift the vehicle to maximum height effortlessly with fewer pumps and will last longer even after tough use.

To make sure the tool is completely safe for operation, it comes with bypass and built-in safety valves to avoid over-pumping and overloading. All in all, it can cope well with fairly heavy vehicles including modified cars, making it a great choice for home use and roadside emergencies.

Pros

• Durable steel construction.
• Can reach under most low clearance vehicles including show cars.
• Load capacity of 2.5-tons.
• Improved hydraulic system for leak-proof rapid pumping.

Cons

• Maximum lifting range is below average.

Final Thought:

This floor jack is highly recommended, for people who want to switch to a low profile jack, mainly because of its decent weight capacity and improved pumping mechanism. Its minimum lifting range makes it suitable for most low clearance vehicles including show cars.

5.   Arcan XL2T Low Profile Floor Jack

Arcan has a reputation for giving top-notch products and this low profile floor jack is a befitting demonstration of the brand’s superior craftsmanship. Despite a relatively higher price, it can develop a soft spot fairly easily. Its high-quality steel construction makes it as strong as an iron man so it can undergo some tough beating and still work smoothly.

A low profile jack, it has by far one of the lowest minimum range of 2.75-inches and one of the highest maximum range of 24-inches available in the market. And once you add its extra-long reach, you get a floor jack that can easily reach under almost any vehicle with low clearance including the latest sports cars.

The only thing that you might not appreciate is its weight capacity of 2-tons which makes its use limited to light vehicles. The good thing is, there will be no harm inflicted upon the unit or your vehicle during lifting as the tool comes with bypass and overload protection valves and padded saddle and foam handle to protect the vehicle from scratches and dents.

Going further with its flawless construction and smooth performance, it profiles dual-pump pistons and a universal joint release mechanism to quickly elevate the vehicle to an ideal maintenance height and then descend it with equal swiftness when the repair is done.

All this solid build adds extra pounds to the weight which means you actually need muscles of hulk to carry it far. However, the presence of swiveling wheels offers a silver lining with their easy maneuverability and positioning.

Pros

• Heavy-duty steel construction.
• Extra-long reach.
• Ultra-low profile frame.
• Can lift to a high height of 24-inches.
• Dual-pump pistons for faster lifting.
• Padded saddle and foam handle for vehicle protection.

Cons

• Limited weight capacity of 2-tons.

Final Thought:

If you’re looking for a solidly build low profile floor jack with the lowest low height range to easily slide underneath any low clearance vehicle – including exotic cars – and lift it to an impressive height without flexing, then this model is a worthy option.

6.   Sunex 6602LP Low Rider Service Jack

The first word that’s going to resonate in your mind is: “Giant!” Yes, it looks like a giant when placed among other competing models mainly due to its hefty price tag and beefy construction. Heavy duty steel build makes it nearly indestructible and at the same time adds extra pounds in weight.

The silver lining is, solid construction gives the tool giant-like strength for lifting anything from low-riding sports cars to SUVs and pick-up trucks easily as if they weigh like a feather. Practically, anything within 2-tons load capacity is a game.

This beast beats its competitors with its 18-inch long throw and consistent low-profile design throughout the frame that provides easy access to jacking points even when they’re deep under the vehicle. Thanks to rapid rise technology, it only takes 6 1/2 pumps to elevate the vehicle to a maximum height of 24-inch. This extra height lift is ideal for working freely underneath a car without feeling claustrophobic. The tool features a much-coveted rubber saddle and a foam handle bumper to keep your baby, car, protected from ugly scratches and dents during the repair.

Since Sunex knows that only the floor jack has the power of hulk not you, therefore, it has incorporated front rollers and swiveling rear casters to allow you to easily maneuver this giant.

Pros

• High-strength steel construction.
• Can handle anything from sports cars to pick-up trucks and SUVs.
• Lift range from 2.75-24 inches.
• Consistent low-profile design with an 18-inch long reach.
• Padded saddle with a foam handle bumper to protect the vehicle.

Cons

Final Thought:

This floor jack with its high-strength construction along with ultra-low profile and extra lift height can tackle any vehicle from sports cars to SUVs and pick-up trucks without difficulty. Going extravagant will decorate your garage with a long-lasting low-profile floor jack.

7.   Blackhawk B6350 Fast Lift Service Low Profile Floor Jack

This is a hulk with the only difference of color. Instead of green, this one is black/red in color but it’s a hulk nonetheless in power and strength. Like the superhero,  this Blackhawk low-profile floor jack can lift a massive weight of 3.5-tons without flinching. This high strength is mainly attributed to its beefy steel construction which adds extra pounds to the overall weight of the tool – making it a heavy piece of equipment that’s nearly indestructible. Don’t wish for superhero strength for carrying it around because it employs sturdy wheels and a rear caster to provide convenient maneuverability and positioning.

It surely knows how to capture attention because the tool comes with a high lift of 22-inch, which is quite impressive for a low-profile floor jack. Rolled side frames give an extra dose of strength to the tool to easily lift heavy-duty vehicles to maximum height. Like lifting, lowering the vehicle back to the ground is also easy and fast due to the integrated release valve.

As safety comes first, the tool has built-in safety valves, vent plugs, and bypass valves – to prevent over-pumping – for keeping both you and the tool out of harm’s way while working, not to mention significantly extend the lifespan of the tool.

Pros

• Heavy-duty steel construction.
• Built-in safety valves to keep both tool and user safe.
• 5-tons load capacity.
• Can lift to a height of 22-inch.
• Sturdy wheels and rear caster for easy maneuvering and positioning.

Cons

• It’s not rust proof.

Final Thought:

This steel-built floor jack comes with high strength and lift capacity to easily elevate any vehicle from car to truck to an ideal height in seconds. The tool is heavier than an aluminum model with the same capacity but extra pounds also add extra years to the overall lifespan of the unit.

8.   Pittsburgh Automotive Low Profile Floor Jack

There’s either an industrial-grade expensive floor jack or a mediocre range affordable model. But Pittsburgh Automotive leaves you speechless because this low-profile floor jack has both, long-lasting durability and affordability at the same time.

This highly tough model has beastly strength which makes it possible for it to easily lift a heavyweight of 3-tons to nearly two feet off the ground in a snap. This supersonic lifting speed is mainly attributed to its dual-piston Rapid Pump technology that takes only 3 1/2 pumps to lift a vehicle. In addition, its universal joint release provides optimum load control in any handle position. Meaning, no more huffing, and puffing or overexerting muscles. Peachy, isn’t it?

Its ultra-low profile offers extra satisfaction because the tool can slide under those low clearance vehicles that are almost kissing the ground – like sports cars or exotic cars. More impressive are its ultra-wide steel casters as they not only offer easy positioning but also greater stability even on a rough surface.

You’re in for another surprise because this beast is light in weight despite the sturdy construction, making it easy to carry it around. So, whether you’re a professional mechanic or a hardcore car fanatic, this low-profile floor jack will take a permanent space in your garage.

Pros

• Durable and lightweight.
• Ultra-low profile structure.
• Maximum load capacity of 3-tons.
• Faster lifting to a height of almost 2-ft.
• Ultra-wide casters for maximum maneuverability and stability.

Cons

• Jack stands aren’t included.

Final Thought:

This low-profile floor jack is a treat for any car enthusiast or professional mechanic as it comes with high weight and lift capacity at an affordable price without compromising on overall quality and strength of the tool.

9.   JEGS 80077 Low-Profile Floor Jack

In the presence of bulky steel chassis floor jacks, a model with aircraft-grade aluminum construction is like a breath of fresh air due to its lightness in weight without cutting down on the strength of the tool. The tool can handle an impressive load of 3-tons without difficulty. It’s not just low profile. It’s ultra-low! That means it can easily get underneath any low clearance vehicle, including sports cars.

Another noteworthy quality is that it can lift a vehicle to a height of 19-inches, which is really admirable for a low-profile model. You get enough room to work freely underneath any vehicle. Besides, its front rollers along with side handles and wide track wheels not only provide convenience for maneuvering and positioning of the tool, but also keep it well-grounded. Its 360 rotating rubberized lift pad securely fits the vehicle in any direction all the while keeping it protected from accidental scratches and dents. Thanks to wide chassis, the vehicle remains steady while lifting.

While we’re still on the subject of protective features, the tool itself is also protected from damage due to built-in bypass and overload protection valves. In other words, use it or abuse it for years and yet the tool will not corrode, rust or lose its lustrous appearance.

Pros

• Long-lasting, lightweight and portable.
• 3-tons maximum weight capacity.
• Lift to a height of 19-inches.
• Front rollers and wide track wheels for maximum maneuverability.
• Rubberized lift pad for vehicle’s protection.
• Bypass and overload protection valves.

Cons

• Requires more pumps to raise a vehicle.

Final Thought:

This high-quality and capacity low-profile floor jack is highly recommended for all those professional mechanics and serious DIYers who have to maintain low-clearance vehicles, like modified cars, on regular basis.

10. Neiko Pro 20272B Low-Profile Floor Jack

Have you ever seen a beast with a beautiful appearance? Take a look at this low-profile floor jack that packs the strength of a beast and yet has a sleek and lustrous appearance to capture your attention. Thanks to industrial-grade aluminum construction the tool are impressively lightweight but that doesn’t mean it’s weakling. It can take a tough beating and yet work like a charm without breaking apart unless sledgehammered of course. The real charm is that also it profiles dual-sided handles, making it more convenient for users to carry and transport it around.

For keeping up with its hulk-like strength, it can easily lift a bulky weight of 3-tons to an impressive height of 19-inches effortlessly. Such fluid and faster lifting are mainly attributed to its dual plunger design that takes fewer pumps to lift. As the name suggests, it’s pro at getting under low-clearance vehicles because of the low profile design.

No matter how high or low you hold the vehicle in the air, there will be no damage to both, vehicle and the tool, as a rubber dotted saddle securely grips the vehicle and protects it from accidental impacts while the in-built safety valve keeps the unit protected from overloading.

No doubt such strength and longevity is going to put a massive hole in your pocket, but this onetime investment will give you a high-strength versatile tool that can deliver auto repair services on any vehicle including sedans and SUVs anywhere – garage, auto shop, and roadside emergency.

Pros

• Durable, lightweight and portable.
• Faster lifting with dual plunger design.
• 3-tons weight capacity makes it compatible with a wide array of vehicles.
• Rubber dotted saddle for vehicle’s protection.
• Swivel rear casters and double-sided handles for maximum maneuverability.

Cons

• High-costing.

Final Thought:

This premium-grade low-profile jack will cost you a fortune but in return give you a long-lasting high-strength tool that can easily and quickly lift heavyweight to an ideal maintenance height. It can offer excellent services anywhere – in the garage, auto shop, or on roadside emergency.

Guide to Buying the Best Low Profile Floor Jack in 2023

Now that you’ve got a rough idea what a low profile floor jack entails, it’s better to take a look at some important aspects that you need to know about when shopping for the best low profile floor jack. Since you’re going to spend a good sum of money, therefore, this buying guide makes sure that you’ve all the knowledge necessary for making an informed choice.

• Load Capacity:

The first thing you need to look for is the maximum weight that a floor jack can carry. Vehicles come in different weights and some which are heavily modified weigh more than factory weight. A 2-tons or low capacity floor jack will have limited use. On the other hand, floor jacks with 3-tons and above load capacity are more powerful and versatile as they can handle a wide range of vehicles including heavy-duty trucks.

• Lifting Range:

It’s the lowest height from which a floor jack can lift a vehicle to raise it to maximum height. Some models mentioned in the list have a low minimum range of 2.5-inches which means they can easily slide under low-clearance vehicles like sports cars and other dead dropped vehicles. Moreover, if you’ve to lift big vehicles like SUVs and Jeeps, then make sure the maximum lift range is above 14-inches. A floor jack that can raise a vehicle to 18-inches and above is even better because it can tackle trucks as well.

• Lifting Arm:

This is the part of the floor jack that does the actual lifting so it should be extra sturdy and durable to not collapse under heavyweight.  Reinforced lift arms are of heavy-duty construction to add extra strength and durability to the tool. The sturdier the lift arm is, the more stable it will be during lifting heavyweight in the air.

Also, there are lifting arms that come in multiple pieces so you can easily shorten the length of the arm when working in confined spaces. However, remember that it will require extra strength while pumping.

• Saddle Pad:

The saddle pad is that part of a low profile floor jack that comes in direct contact with the jack point of your vehicle. Make sure that it’s composed of high-grade anti-slip material to securely fit the vehicle. Highly rated low-profile floor jacks have an anti-skid coating for extra security. Also, many models use a rubber padded saddle to protect your vehicle from scratches and dents while lifting.

• Handles:

Whether low-profile or standard floor jack, all are heavy. Jacks made of high-quality steel are bulkier than those constructed from aluminum. In both cases moving them around is difficult. Therefore, always select a model that has handles for easily moving it around.

• Rollers & Casters:

They are wheels placed at the bottom of a floor jack. Low profile floor jacks are heavy so make sure the model you’re selecting comes with rollers and swiveling rear casters as they will provide fluid movement. Besides, maneuvering and positioning of jack under low-clearance vehicle become difficult. In that case, it the wheels and handles that provide maximum maneuverability for adjusting the position of the tool.

• Build Quality:

Most commonly, jacks are made of high-quality materials like steel or aluminum. Both have their own strengths and weaknesses. Steel construction is heavier than aluminum but also more durable and sturdier. If you’ve to use jack in home or home garage, then you’ll be better off with aluminum construction. On the other hand, for more rigorous and professional use, steel build is more reliable as it can cope better with wear and tear and tougher use without breaking.

Conclusion

Whether you’re a workshop owner or a hardcore car aficionado, getting around with car maintenance and repair will become easier with a good quality low profile floor jack. The above-mentioned list of best low-profile models and the buying guide will fully educate you on what a best low-profile floor jack should entail to make it really best for your needs.

Floor jacks can turn the tedious job of tire change into a breeze by lifting your vehicle in the air in a couple of minutes.

But there is always the risk of jack giving out under the heavyweight, hence causing your vehicle to collapse to the ground.

It will not only cost you the life of your vehicle but in some scenarios may cost you your own life.

Aluminum floor jacks make sure the above-mentioned scenario does not happen. They have strong, durable bodies that pack ultra-strength in a compact size. Their super strength also brings more lifting capacity to the table along with the added perk of being compatible with even low profile vehicles.

The sturdy wheels and rubberized saddle are extra benefits that make sure that you get the smoothest operation.

Top 7 Best Aluminum Floor Jack Reviews of 2023

However, seeing so many options of aluminum floor jacks in the market may confuse you which is why we have added 7 best aluminum floor jacks in this article to help you.

1) NOS NSJ0301 Aluminum Floor Jack:

This floor jack has massive strength packed in a small, compact, and comparatively lightweight body. The small size makes it perfect to have in your car trunk for roadside emergencies or garage use.

It is capable of lifting 6000 pounds which means it will be able to handle a wide range of vehicles from your low vehicles like sports cars to your jeeps and trucks. This durable floor jack delivers a lifting range from 3.75 inches to just a bit over 18 inches, which will be more than enough.

Do not let the lightweight fool you into thinking it has a low-quality exterior, it is constructed from high-grade aluminum which brings strength and durability to the table.

The presence of caster wheels with swiveling rear wheels makes maneuvering this tool a breeze. The durable wheels are of long-lasting metal that will not succumb to death under high weight.

The lifting saddle is 4.5 inches and gives plenty of stability. There is a rubber pad over the saddle to make sure your car stays scratches and dents-free. Along with the saddle, there is also a convenient side handle to make it easy to carry.

A reliable safety valve is designed in, along with dual-pump operation that improves the lifting speed. It delivers a lot in a considerably light weighted body, it only weighs 58 pounds. It is also equipped with a universal joint design to give you maximum control. The two-piece handle design has a foam pad for the protection of your vehicle from accidental scratching or denting.

Pros

• Rubber saddle pad
• 1 year warranty
• Strong aluminum body
• 3 ton lifting capacity
• Side handle for easy carrying
• Lightweight as compared to others
• Foam handle
• Compact in size

Cons

• Side handle is not placed correctly
• No parts available

Bottom line:

If you want a floor jack that is loaded with perks like lightweight, low price tag, high power, the compact body then you will not find one better than this. It brings everything in a strong aluminum body.

2) Arcan ALJ3T Aluminum Floor Jack:

This floor jack arrives with a strong body and protective features that are bound to ease your job by making your operation safest and quickest. It is made from a high-grade aluminum that gives it a very strong exterior. It also has thick side plates and a reinforced lift arm for maximum toughness. The exceptional construction provides added strength and durability.

Due to its strong body, it is able to lift 3 tons of weight and has a 3 ¾ inch minimum lift height for easy access under low-profile vehicles.

The presence of a dual-action pump piston is a real game-changer. The dual-action pump pistons quickly bring the two-stage jack to its maximum height. Each piston is equipped with protective gear and has a special dust shield to prevent hydraulic contamination and keep the pump operating smoothly.

The long two-piece handle makes sure you get the leverage you need to maneuver your jack and then breaks down in two parts for easy storage. There is a quick lock feature that provides easy engagement and disengagement of the handle halves. The jack also features bypass and overload valves to prevent overextension of the hydraulic ram, safely keeping you from using the jack beyond its rated capacity.

To top all these amazing features, the jack has strong metal swiveling rear wheels and wide track front wheels that give stable and smooth rolling performance hence making it easy for you to move the jack without heaving.

Pros

• Portable
• Strong aluminum build
• 1 year warranty
• Lifts 3 ton
• Piston pumps with shields
• Low profile frame
• Strong wheels

Cons

• Expensive
• Weighs 56 pounds

Bottom line:

If you want a floor jack that has the power to lift your low profile cars as well as heavy vehicles like jeeps, then invest in this floor jack, although it is a bit costly.

3) Powerzone 380044 Aluminum Floor Jack:

The Powerzone 380044 Floor Jack is a treat for mechanics given its 3 ton weight capacity, strong body and nifty features. The strength of the body is due to the combination of steel and professional grade aluminum structure that makes it able to withstand rough uses without bending underweight. The finish on top of aluminum not only makes it look shin but also provides protection from rust.

With its high lifting capacity, you can lift any automobile measuring up to 6,000 tons. To prevent the floor jack from being overloaded and damaging both the vehicle and jack, the manufacturers have fitted a safety valve that keeps the weight in check so that you know when it is being overloaded.

Another feature that broadens its use is that it comes with a minimum height of 4 inches which means it can easily be used on your low profile vehicles like sports cars that normally require a special jack. On top of that, it features an impressive lifting range of 14.75 inches which takes the jack to a height of 18.75 inches which gives you more than enough room to work with. To achieve this height in the shortest time, this Powerzone floor jack features a dual cylinder quick lift mechanism.

Its rear caster wheels are designed to swivel enabling ease of repositioning. Even better, however, is the fact that they are made from steel further enhancing their durability and strength under heavyweight. The edges of the floor jack are rounded for safety purposes while the lifting pad is rubberized to improve on the grip as well as help to protect the vehicle being lifted.

Pros

• Steel and aluminum body
• 3 ton weight capacity
• Quick lift hydraulic mechanism
• Maximum lifting height of 18.75 inches
• Rubberized saddle
• Portable
• Rotating wheels

Cons

• Heavy in weight
• Handle is a bit stiff

Bottom line:

Investing your money in this high-grade floor jack will get you a tool that is able to withstand rough use, can lift a large amount of weight, and does not come with a hefty price tag.

4) Neiko Pro 20272B Aluminum Floor Jack:

This floor jack by Neiko will make your life easy by lifting your vehicle without causing a dent in the vehicle or your pocket. It is constructed from durable industrial-grade aluminum alloy that gives it an extremely strong exterior. Even with a strong and durably build design it is still much lighter in weight as compared to other jacks available in the market. This floor jack is ideal for tire changes and auto repair services on sedans, SUVs, and racking cars in shops, garages or to be kept in cars for roadside emergencies.

Lightweight does not mean it will no lift as well as its competitors; it has a lifting capacity of up to 6000 pounds which means it can have your heavy vehicle up in the air in a few minutes. It has a lifting height range of maximum 19 ¼ inches. The dual plunger structure provides quicker and more efficient lifting from 3 ¾ inches to 19 ¼ inches.

The swiveling rear caster wheels along with the dual handles on the side make it easy for you to move the jack from your garage to the worksite. The wheels are strong enough to withstand the weight of the vehicle when it is lifted.

The saddle pad has a covering of rubber to prevent the tool from marring up your vehicle. Another good inclusion is that it comes with a safety valve for protection from overloading. If your floor jack will be loaded beyond its capacity, it will automatically release some of the pressure to not be damaged.

Pros

• Durable aluminum construction
• Low profile design
• Can lift 6000 pounds
• Comparatively lighter in weight
• Dual handles
• Safety valve feature
• The saddle has a rubber covering
• Sturdy wheels

Cons

• No carrying loops
• Costs a bit more than competitors

Bottom line:

This floor jack is ideal for both home users and professional mechanics due to its high lifting capacity, in a very lightweight user-friendly design.

5) Jegs 80077 Aluminum Floor Jack:

This floor jack will take all your worries away with its handy features packed in solid construction. The durable professional-grade aluminum construction gives it a rugged exterior that is able to withstand rough use and will not give up on you or your vehicle. It comes with a massive lifting capacity of 3 tons which includes your sedans, sports cars, jeeps, and SUVs.

It has a low-profile design which makes it suitable for low-profile vehicles too. The low profile pad height allows you to quickly and accurately place it under the vehicle that has to be lifted. The double side handles and the wheels simplify not only the movement of the floor jack, they also make it easier for the jack to be positioned under the vehicle.

This boy has a minimum saddle height of just 3 ½ inches and a maximum saddle height of 19 ¼ inches which is more than enough to provide plenty of working room under the vehicle. The saddle rotates 360 degrees and has a rubber pad present on it to protect your vehicle from scarring up.

Lastly, it is equipped with a protective seal to keep the hydraulic system secure and have the jack-up and running easily without any setbacks.

Pros

• 3 ton weight capacity
• Professional grade aluminum construction
• Maximum lifting height of 19 inches
• Rotating saddle
• Rubber lifting pad
• Protective seal
• Handle comes with sleeve

Cons

• Makes little squeaking noise
• Lift arm is not centered

Bottom line:

This professional-grade aluminum floor jack is the perfect solution for those who want a jack for both their low-profile vehicles and heavy vehicles. It will give you optimum performance with its comfort and precautionary features.

6) BIG RED T84025B Torin Aluminum Floor Jack:

This jack is made from high-grade aluminum and durable steel to provide with a huge amount of power in a strong body that will not succumb to death underneath the weight. It has a lifting capacity of 2.5 tons which is more than enough for someone who owns small vehicles.

The quick lift design makes it easy for you to raise your vehicle in the air quickly. It takes 7 strokes to reach the maximum height. It has a minimum lift height of 4 inches and a maximum height of 18 ¼ inches.

This handy tool features a low profile design which means it will be able to slither under not just your standard height vehicles but also your low profile vehicles too.

Its handy features include the dual side handles which make makes moving and carrying the jack quick and simple. Another thing, the floor jack comes with a removable saddle. This removable saddle offers faster and more effective lifting of different vehicles. There is a foam bumper on the handle that helps prevent your tool and the vehicle from damage like scratches and dents.

A really good inclusion in this jack is the built-in safety overload system that prevents use of the tool beyond its load capacity.

Pros

• 7 strokes to reach maximum height
• Foam bumper on the handle
• Maximum lift height is 18 inches
• Fast lift design
• Suitable for low profile vehicles too

Cons

• Heavy in weight
• Only suitable for small vehicles

Bottom line:

If you need a jack for a fast and effective lifting job, this strongly built aluminum floor jack is ideal for you then.

7) TruePower 20-1020 Aluminum Floor Jack:

This TruePower floor jack really is true power that is able to lift your vehicles in the air in a couple of minutes and without causing any damage to the vehicle. It is very light in weight as compared to its competitors but does not let the lightweight fool you into thinking it is unable of lifting your vehicle.

Despite its extremely lightweight, it is able of lifting 3000 pounds of weight which is good enough for those who have sedans and other light-weight vehicles. The lightweight design also makes it easily portable.

Light in weight does not mean it has some flimsy, plastic construction. This beast is made from high-quality aluminum that gives it stability and durability.

It features a low profile design which elaborates the use of this jack, meaning it can be used for those vehicles too that have low frames and normally require a special jack.

The saddle is 360 degrees rotatable and has a rubber pad on it to prevent the tool from causing any sort of damage to your vehicle. The 2 pieces knurled aluminum handle prevents slippage. It has alloy-plated ram double-sealed hydraulics that gives longer service life.

Pros

• Only costs 70$
• Low profile design
• Durable aluminum construction
• Good reach for jacking points
• Weighs 29 pounds

Cons

• Handle does not get attached
• Only for vehicles under 2000 lbs

Bottom line:

If you are looking for a strong aluminum floor jack that will lift your vehicles in the air in a couple of minutes with its sturdy body then look no further and invest your bucks in this model.

What to Consider Before Buying Best Aluminum Floor Jack in 2023?

Floor jacks are always a wise investment but that investment can cause a lot of damage if you spend the money on a weak floor jack. It will not just damage your vehicle but can also put your life in danger. In that case, aluminum floor jacks have proven to be the best of all. They hold high lifting capacity in a really strong, powerful body that will not bend under the weight of your vehicle.

The above-mentioned list of aluminum floor jacks has given you many options of the best floor jacks but how will you know which one is the most suitable for you as not every tool is suitable for every vehicle. To help you with this confusing situation, we have made a list of some of the factors that can ease your decision of deciding which aluminum floor jack is best for you.

1. Weight:

No matter how handy an aluminum floor jack is people will run away from it if it weighs like a truck. Nobody looks forward to using a tool that gives them backaches. Make sure the floor jack you are eyeing is light in weight and will not make your job even worse.

2. Capacity:

The capacity of an aluminum floor jack is a very important factor. Every floor jack comes with a different weight capacity ranging from 1 ton to even 5 tons. Before you opt for an aluminum floor jack you should know the weight of vehicles you will be using and hence select one that will be able to lift those vehicles.

3. Lift height:

As floor jacks are low in height, it means their maximum heights are also comparatively low. Always check the maximum lifting height of a jack because you want one that has more height so that you can have more room to work in.

4. Padding:

Make sure the jack you choose has reliable padding features. Rubber and foam are both good materials that will keep both your jack and the vehicle safe from scratches and dents during operation. It’s a very simple feature, but also one that can make or break your entire user experience.

5. Price:

Aluminum floor jacks are comparatively pricier than steel floor jacks. Their prices range from 130$ to 250$ plus. The ones that are in high price zone have a few extra features than the ones in low price range, but they all are capable of doing the job remarkably well. If you are on a budget then go for ones that are budget-friendly.

6. Safety features:

These include bypass and overload valves that keep the jack from lifting more load than its capacity. Safety feature prolongs the life of your aluminum floor jack so always go for the one that has built-in safety features.

7. Warranty:

Aluminum floor jacks are an investment that will cost you hundreds of bucks so naturally, you will want to have it working for a couple of years, but not every jack lasts that long. This is where warranty plays its role. Companies that back their products with a good warranty mean that they trust their product to work well, so make sure the aluminum floor jack you are opting for comes with a good warranty.

Conclusion:

The versatile nature of aluminum floor jacks provides diverse functionality. They give you a good amount of weight capacity and height lifting range in a very compact and strong body. The article above has a list of some of the best aluminum floor jacks available in the market. The buyer’s guide will help you decide which one you should go for.