How to Put Car on Jack Stands?

How to put car on jack standsA jack is a device used to lift heavy loads and is even used to apply great forces. Jacks are used primarily to maximize the lifting capacity. There are several kinds of jacks, and the most common among them are car jacks, floor jacks, or garage jacks.

What is a jack stand?

Jack stands are tripod-shaped tools designed to lift and support load lifted and are a fundamental tool of vehicle lifting. It is an essential tool for a safe work environment when working underneath or inside trucks and cars or any other heavy vehicle.

Lifting and holding onto the load is not the sole use of jack stands, they can also be used when it comes to providing a stable environment to offload or reload the cargo materials.

The general function of all jack stands is the same, but their structure and the masses can vary, depending upon what sort of vehicle they have been designed to support.

What is a car jack stand made of?

Carjack stands are produced using steel, cast iron, or aluminum; car jack stands are accessible in two styles: a three-legged pin lock model like a tripod shaped and a fastener lock adaptation with four legs. The fastener style is more straightforward to utilize and ordinarily upholds more weight, while the four-leg base gives more excellent stability.

How to put a car on a jack stand?

Whenever we want to work with our vehicles, it is essential to ensure they are securely lifted. This is the motivation behind why jack stands are so important and is a need of every garage or workshop.

They guarantee that the vehicle is raised appropriately to finish your work and avoid injuries. You want a particular jack stands if you’re going to check your vehicle’s underside or check whether there’s any rust. Likewise, you can utilize jack stands, assuming you wish to change a tire.

When it comes to putting up a car on a jack stand, a few points are supposed to be kept in mind to complete the task without getting involved in injuries. And you can put your car on the jack stand and redeem the error to be back on the roads.

Need to find the Flat surface:

Working on a flat surface is a good idea; it keeps your vehicle stable and in the best state to lift the load. Changing your vehicle’s tire or raising it for any purpose on a bumpy or heavy traffic road can be a wrong choice as it should be made compulsory to use a car jack stand on a paved area so that the jack or jack stand won’t slip from underneath the car.

Once a place has been picked up for lifting the vehicle.

Activate the Parking brake:

Before you jack up the car make sure that the parking brakes are engaged, find the hand brakes in your car, and make sure you pull it until it is activated. This will ensure that the car won’t lurch either way while trying to jack your vehicle.

Chock the wheels:

To prevent the car from rolling unexpectedly, you need to place chocks around the wheels or, depending on which side you are trying to jack up.

If you lift the front right wheel, put the chock behind the back left rotation. Suppose you raise the left half of the vehicle but one chock in front of the front right tire behind the back right wheel.

Certain jack standpoint:

Place your jack stand under the squeeze pinch points, usually somewhere close to the front tires and back tires. Specific jack points are the areas that are specially designed to make contact with the jack if your car doesn’t have pinch points. Set your jack stand underneath the car frame.

Lift the jack:

Lift the vehicle by using the jack. To raise one of the front wheels, position the jack just behind the wheel. Pump the jack handle down and back up more than once. When the vehicle’s total weight is upheld on the jack stand(s), you can either eliminate the jack or leave it ready for some other time.

Wiggle the wheel:

Wiggling the vehicle likewise lets you know whether you have the wheels impeded properly. It’s better to assume that the car falls while every four wheels are set up. (It will bounce only a tad.)

Eliminate the jack:

When you’ve wrapped up adjusting your vehicle, utilize the jack to raise it back up an inch to eliminate the jack stand. Gradually open the jack’s release valve to bring down the car securely back to the ground. Eliminate the jack.


You may now fix whatever needs to be repaired now that your car is securely raised. Of course, be cautious when working on your car with your body below it, and ask your friend to keep an eye on you in case you are injured. As previously stated, you are unlikely to be injured if your vehicle is supported by all four jack supports.

However, you can never be too careful, so try to place something sturdy (like wood blocks) beneath the four wheels so that your vehicle does not fall on you if the jack supports fail. When you’re through with your repairs, use the floor jacks to elevate your automobile one end at a time and remove the four jack stands.

Janathan Greez
Latest posts by Janathan Greez (see all)

Leave a Comment