10 Best 3 Ton Floor Jack of 2023 – Unbiased Reviews & Buyer’s Guid


A floor jack is a good investment if your vehicle constantly needs to be lifted for repair and maintenance like tire change.

However, manual floor jacks not only make the job excruciatingly long and tiring but also ugly by often leaving marks on your car.

A single or 2 ton floor jacks are comparatively good but their use gets limited to light vehicles due to the weight capacity. In such cases, what you need is a strong 3 ton floor jack.

With their strong exterior and high lifting range, 3 ton floor jacks are capable of hoisting not just your regular small cars but also heavy vehicles like trucks and SUVs. Its aluminum body with a rubber padded saddle makes sure both your floor jack and vehicle stay scratch-free during the entire job.

The swiveling rear wheels make it easy for the tool to be fluidly slithered under the vehicle and lift it up.

Top 10 Best 3 Ton Floor Jack of 2023 Reviews

In the search for the best 3 ton floor jack, you can easily get confused due to the wide variety of available options. That daunting task has been made easier with this article that gives you a list of the top ten 3 ton floor jack available in the market along with a buyer’s guide.

1) NOS NSJ0301 Aluminum Service 3 Ton Floor Jack:

NOS NSJ0301 Aluminum Service 3 Ton Floor Jack

This floor jack has the strength of a beast packed in a compact design. It’s powerful yet compact body design makes it capable of lifting a wide range of vehicles from sports cars to trucks. The lift capacity is 6,000 pounds, which means the NOS NSJ0301 is rated at 3 tons. This durable floor jack delivers a lifting range from 3.75 inches to just a bit over 18 inches, which will be more than enough.

A reliable safety valve is designed in, along with dual-pump operation that improves the lifting speed. It delivers a lot in a considerably light weighted body, it only weighs 58 pounds. The small size makes it perfect to have in your car trunk for roadside emergencies or garage use.

The caster-style wheels help you maneuver this jack and you’ll get plenty of stability with the 4.5-inch lifting saddle. The durable wheels are of long-lasting metal that will not succumb to death under high weight.

In addition to the main body of high-grade aluminum, this jack has a rubber saddle pad as well as a convenient side handle to make it easy to carry. It also comes with a universal joint design for you to have maximum control. The two piece handle design has a foam pad for the protection of your vehicle from accidental scratching or denting.


  • Rubber saddle pad
  • Side handle for easy carrying
  • Lightweight as compared to others
  • Foam handle
  • Compact in size
  • Large lifting capacity


  • Not any

Bottom line:

If you want a floor jack that is able to lift your heaviest vehicles with ease, stores high power in a good, compact, lightweight body, and light price tag, then this strong beast is your safest choice.

2) Powerzone 380044 3 Ton Floor Jack:

Powerzone 380044 3 Ton Floor Jack

The Powerzone 380044 Floor Jack is a treat for mechanics given its 3 ton weight capacity, strong body, and nifty features. With this weight capacity, you can lift any automobile measuring up to 6,000 tons. To keep the floor jack from being overloaded and causing havoc, the manufacturers have fitted a safety valve that keeps the weight in check.

This powerful floor jack comes with a minimum height of 4 inches. This height is enough to lift some low-profile cars. Moreover, it features an impressive lifting range of 14.75 inches which takes the jack to a height of 18.75 inches which gives you more than enough room to work with. To achieve this height in the shortest time, this Powerzone floor jack features a dual cylinder quick lift mechanism.

This floor jack is made from a perfect combination of steel and aluminum and features a shiny professional finish. The top finish not only gives it an appealing look but also provides protection from rust. The edges of the floor jack are rounded for safety purposes while the lifting pad is rubberized to improve on the grip as well as help to protect the vehicle being lifted.

Its rear caster wheels are designed to swivel enabling ease of repositioning. Even better, however, is the fact that they are made from steel further enhancing their durability and strength under heavyweight.


  • High weight capacity
  • Aluminum frame
  • Quick lift hydraulic mechanism
  • Rubberized saddle
  • Portable Floor Jack
  • Rotating wheels


  • Not any

Bottom line:

The lightweight nature, along with other features makes it portable and best suited for persons looking for a handy tool for lifting a heavy truck or car while on the road.

3) Arcan ALJ3T 3-Ton Floor Jack:

Arcan ALJ3T 3-Ton Floor Jack

This floor jack arrives with a strong body and protective features that are bound to ease your job by making your operation safest and quickest. This Arcan professional-quality aluminum built jack has a 3 ton lift capacity and a 3 ¾ inch minimum lift height for easy access under low profile vehicles.

This beast starts weaving its magic with the dual-action pump pistons that quickly bring the two-stage jack to its maximum height. Each piston is equipped with protective gear and has a special dust shield to prevent hydraulic contamination and keep the pump operating smoothly. The long two piece handle delivers the leverage you need and then breaks down for easy storage. The quick lock feature provides easy engagement and disengagement of the handle halves.

This floor jack has think side plates and a reinforced lift arm for maximum toughness. The exceptional construction provides added strength and durability. The jack also features bypass and overload valves to prevent overextension of the hydraulic ram, safely keeping you from using the jack beyond its rated capacity.

No matter how powerful the jack is, using it will become a headache if it does not come with wheels to easily slide it under the vehicle. That is not the case with this beast. The strong yet lightweight jack comes with rear swiveling caster wheels and wide track front wheels for superior stability and smooth-rolling performance that helps you easily position the unit right where you want it.


  • Portable
  • Strong aluminum build
  • Lightweight
  • Piston pumps have shields
  • Low profile
  • Thick frame
  • Swiveling caster wheels


  • Not any

Bottom line:

If you want a floor jack that gives you the power of a pro in a light-weighted, compact body then get your money and hands-on this one immediately.

4) Big Red Torin T83006 3 Ton Floor Jack:

Torin T83006 3 Ton Floor Jack

This floor jack comes with bearing functions that will not just make your job easy but will also be gentle with your vehicle. You do not want a floor jack that lifts up your truck only for it to slip and fall on you, damaging the vehicle and endangering your safety. It will lift the vehicle up and hold it in that state till you lower it yourself.

It has a 3 ton capacity meaning it can lift up to 6000 pounds which makes it great for your trucks, SUV’s and other vehicles. It can easily lift the vehicle from 6 inches to 21 inches.

What sets this beast apart from other floor jacks on the market is the fact that it comes with a long neck. With most floor jacks, you have to pump the neck up to lift your vehicle but not this boy. It has a detachable 3-inch neck which simplifies the entire process. This reduces the amount of time and energy you spend on pulling the lever.

When you want to position a jack under a vehicle, maneuverability is crucial. You need strong wheels on your tool that will neither dent, nor fall off. That is why this floor jack features 360 degrees swiveling wheels for easy mobility. They eliminate the time it normally took you to drag the jack out while heaving. It comes with a safety bypass feature that will prevent overloading over the jack.


  • Detachable neck
  • High load capacity
  • Strong body
  • Lightweight
  • Safety bypass feature


  • Not any

Bottom line:

For the price and the features, this floor jack is a really good investment. It will last you many years without the functionality being compromised.

5) Neiko Pro 20272B 3 Ton Floor Jack:

Neiko Pro 20272B 3 Ton Floor Jack

This production by Neiko is made to help you easily lift your vehicles and to replace the old, junk floor jack that you have in your garage. It is constructed from durable industrial-grade aluminum alloy that gives it an extremely strong exterior. Even with a strong and durably build design it is still much lighter in weight as compared to other jacks available in the market.

The lightweight design does not come in the way of its usage. It comes with high lifting capacity of up to 6000 pounds meaning it can easily lift up to 3 tons without succumbing to death. Its dual plunger structure provides quicker and more efficient lifting from 3 ¾ inches to 19 ¼ inches. It is ideal for tire changes and auto repair services on sedans, SUVs, and racking cars in shops, garages, or to e kept in a car for roadside emergencies.

It has swivel rear caster wheels to be easily carried in and out of the garage and easily positioned under the vehicle. The wheels are strong enough to withstand the weight of the vehicle when it is lifted.

To top all these amazing functions off, it comes with a safety valve for protection from overloading. If your floor jack will be loaded beyond its capacity, it will automatically release some of the pressure to not be damaged.

The rubber dotted saddle pad will provide protection to your vehicle’s frame from any scratches or dents. Trust me, you do not want a jack that lifts the vehicle easily, for your job but leaves behind its marks!

If you thought that was all then you are in for a surprise, it also has dual handles on the sides for being carried easily. You get heavy-duty performance in such a light body that also comes with handy designs.


  • Durable aluminum construction
  • Safety valve feature
  • Easily maneuverable
  • Rubber saddle
  • Good price
  • Swiveling wheels
  • Dual handles


  • No carrying loops

Bottom line:

This floor jack is ideal for both home users and professional mechanics due to its high lifting capacity, in a very lightweight user-friendly design.

6) Jegs 80077 3 ton floor jack:

Jegs 80077 3 ton floor jack

This low profile floor jack by Jegs is good news for those mechanics who are tired of their old floor jack that not only is incapable of lifting much weight but also has the issue of accidental slipping. Worry not; this floor jack will have your back when you have to work on your vehicle. The durable aluminum construction gives it a rugged exterior that is able to withstand rough use and will not give up on you or your vehicle. Even though it is pretty light in weight, its lifting capacity is anything but light. It can lift up to 3 tons of weight which is an insanely large amount and guess what; it will do that without you having to worry about the jack slipping from under the vehicle!

It has a low profile pad height that allows you to quickly and accurately place it under the vehicle. This 3 ton beast has a minimum saddle height of just 3 ½ inches which is good for low clearance vehicles and a maximum saddle height of 19 ¼ inches which is more than enough to provide plenty of working room. The saddle rotates 360 degrees and has a rubber pad present on it to protect your vehicle from scarring up.

The dual side handles, along with the wheels not only simplify moving the floor jack but also ease the job of positioning it under the vehicle.

Last but not the least; it has a protective seal to keep the hydraulic system secure and have the jack-up and running easily without any setbacks.


  • Lightweight
  • Rotating saddle
  • Rubber lifting pad
  • Protective seal
  • Handle comes with sleeve
  • Aluminum construction


  • Makes little squeaking noise

Bottom line:

If you are looking to make a long-time investment in a floor jack that will last you many years, while offering you optimum performance along with added comfort and precautionary features, this is the one for you.

7) Pittsburgh Automotive 3 Ton Floor Jack:

Pittsburgh Automotive 3 Ton Floor Jack

This floor jack by Pittsburgh is strong to do everything, you do not need to worry even a little bit, just hook it in its place and let it take care of the rest for you. Its super tough precision welded construction with an industrial-grade finish is what gives it the ability to hoist your vehicle.

It has a lifting capacity of 3 tons, which means it cannot just lift your light vehicles off the ground but will also lift many of your trucks and SUV’s too like a piece of cake. This heavy-duty 3 ton car jack is capable of getting your vehicle almost two feet off the ground.

The dual piston rapid pump technology makes sure you do not need to exert a lot of energy into pumping the lever, it can pump it off the ground with just a few pumps. The universal joint release provides precise load control in any handle position. It has an extra low profile to get it under your low vehicles too. All these features make sure your floor jack can do more without the risk of failure.

It may be a bit heavy than its competitors but Pittsburgh took care of this problem by adding extra-wide steel caster wheels. Furthermore, this has a convenient foot pedal that allows pumping with ease. It also features a knurled aluminum handle that has a good grip. The cherry on top of all these functions is that it houses a foam bumper to protect your precious vehicles from scratches and marring.


  • Wide steel casters
  • Large weight capacity
  • Affordable
  • Strong construction
  • Knurled aluminum handle
  • Rapid pump
  • Aluminum handle
  • Foam bumper
  • Foot pedal


  • Heavy in weight

Bottom line:

If you are looking for a floor jack that does a lot at a comparatively low price, then invest your money in this one. Although it is a bit heavy in weight, that does not affect the fact that it is capable of successfully lifting almost 3 tons of weight.

8) Liftmaster 3 ton Floor Jack:

Liftmaster 3 ton Floor Jack

Liftmaster have introduced a floor jack that will have you astounded by its amazing performance. The feature which sets this one apart from the gang is that it only weighs 20 pounds and yet is still capable of lifting 3 tons of weight! How insane is that! The weight also makes it convenient for you to keep this in the trunk of your car; it will come in handy for roadside emergencies.

The lightweight in no way means cheap to build. It is made from a heavy gauge steel frame that ensures strength and durability. Also, the body frame is manufactured from steel rod iron which is much rigid than conventional materials. As the materials are rust-resistant and corrosion-resistant, you can use them in any weather, even in the rain or the snow without worrying about damaging the jack.

It is a low-profile floor jack which means it is capable of slithering under your low vehicles as well as your regular heighted vehicles. It is capable of lifting standard-sized cars from 7 inches to 21 inches off the ground.

Moreover, this ultra-low-profile floor jack comes with an adjustable saddle that can be swiveled a full 360 degrees. The saddle has a rubber protective pad on it to keep your vehicle insulated from scratches and dents. Do not even worry about releasing the pressure and dropping your car on the ground accidentally, it has a release valve that helps to release the pressure quickly and safely place your car back on the ground.

In addition to all these good features, the best news is that you get this floor jack at an affordable price. Though the price is lower, it never compromises the quality.


  • Affordable
  • Lightweight
  • Swiveling saddle
  • Dual pump
  • Bumper pad for protection
  • Aluminum handle
  • Portable
  • The universal joint release mechanism


  • Lift range is low for large vehicles

Bottom line:

If you need a low-profile floor jack with versatility and compatibility, this Liftmaster is an incredible choice. It helps to lift your vehicles faster and easier with its strong yet extremely light body and comes with a very reasonable price tag.

9) Hein-Werner HW93652 3 Ton Floor Jack:

Hein-Werner HW93652 3 Ton Floor Jack

This floor jack features a heavy-duty frame to keep the jack intact and working even during rugged applications. It is able to lift up to 3 tons of weight. The strong exterior along with the high weight capacity makes it ideal for trucks, SUV’s and your other heavy vehicles. The flanged side plates increase the strength of your floor jack.

It comes with a removable, one-piece handle that you can easily attach and detach from your floor jack. The handle gives a very firm yet comfortable grip. The pump base has an iron cast on it that adds durability and stability to its design.

The wheels present on this beast are strong enough to make maneuvering and positioning very easy for you. Taking it out of the garage will not give you a hard time; you can easily pull it out with the wheels rolling smoothly.

Other nifty features this boy has included a cast-iron lift arm for your heavy-duty loads and the u-joint release mechanism for precise load control.

The pressure release valve not only ensures you do not overload the floor jack but also releases the pressure evenly without hurling your vehicle straight to the ground.


  • Removable handle
  • Sealed pump to reduce risk of damage
  • Cast iron lift arm for heavy-duty loads
  • Universal joint for precise load control
  • Flanged side plates


  • Handle is shorter

Bottom line:

Get your hands on this floor jack if you are looking for a tool that will have your back in your time of need, with its strong body and high lifting capacity.

10) OTC (5303) Stinger 3 Ton Floor Jack:

OTC (5303) Stinger 3 Ton Floor Jack

This floor jack, manufactured by OTC, is the tool that you need if you frequently face flat tires or need to make other repairs to your vehicle. With its strong yet compact body and high lifting capacity, it will prove to be a worthy investment. Its light, compact design makes it easy and convenient to use.

The lightweight does not affect its service in any way, it is capable of lifting 3 tons of weight. It can lift the vehicle from 5 ¾ inches to 18 ½ inches. A flanged upper body edge increases strength to resist twisting.

It comes with a built-in safety overload system that prevents use beyond its capacity and sturdy pair of rear swiveling caster wheels that make the tiring process of dragging it out of storage and positioning it under the vehicle a piece of cake. The wheels are strong enough to withstand even the weight of your vehicle. The saddle has a rubber pad over it to prevent your vehicle from accidental scratches and dents.


  • High lifting capacity
  • Flanged upper body
  • Rubber pad
  • Safety overload system
  • Rear swiveling casters


  • A bit heavy in weight

Bottom line:

Invest your bucks in this floor jack if you do not mind a bit heavy-weighted tool, although the weight does not come in the way of its functionality.

Buyer’s Guide: Get the Best 3 Ton Floor Jack in 2023

Any kind of work related to your car for instance tire replacement is going to be impossible without a good floor jack that is able to lift up your vehicle and then securely place it back on the ground. Light floor jacks can only give you a hand with a couple of your light vehicles and will not be able to lift just every vehicle. For that, you need a good 3 ton floor jack that will not just lift your standard vehicles but also your trucks and SUVs, etc.

3 tons floor jacks have proven to be a good investment for many reasons and a few of them are that it can help you with several vehicles, does not cost much more than a 2 ton floor jack, and comes in a compact yet strong body. But a 3 ton floor jack is a hefty, one-time investment that you need to make very carefully to not have your money and time be spent on a fraud tool. Along with a waste of money, it will also be life-endangering for you to work with a faulty 3 ton floor jack. There are a few points that can help you with this issue.

  1. Jacking Speed:

There are floor jacks that work rapidly and will lift a vehicle as high as possible in just a few pumps of the jack handle and there are also those floor jacks where it seems you pump and pump but they only rise up a little at a time. You do not want the latter especially when you are stuck on a stranded road and need to change the tire. So the speed of the jack should definitely be checked before you buy it.

  1. Wheels:

This may not seem like a big deal, but the floor jack weighs a lot. Now imagine dragging a floor jack out of your garage towards your vehicle and then forcefully pushing it under the vehicle. That sounds tiring, which is why the presence of strong wheels on a floor jack is very important.

  1. Exterior:

Floor jacks have to be built very sturdy in order for them to be able to handle the rigors of the job. Steel built jacks and strong but steel adds a lot to the weight of the jack, on the other hand, aluminum gives strength to the floor jack without adding weight but adds bucks to the price tag of it. Look for a floor jack that is made of a combination of steel and aluminum for both a good price and average weight.

  1. Weight:

The weight of a floor jack is very important. Even if your floor jack offers good service, its use will be limited to the garage only if it weighs a hundred pounds! You cannot carry so much weight in the trunk of your car, so look for a floor jack that offers good service with a light and compact body.

  1. Price:

Price is a factor that may not be important for some people, and crucial for some others. If you are not on a budget then aluminum-built floor jacks are the best option for you, but if you are looking for a budget-friendly floor jack then invest in ones that are either made of pure steel or a combination of steel and aluminum.

  1. Highest lift height:

You also need to know how high your 3 ton floor jack can lift. The average lift range is around 18 to 20 inches from ground level, if it is any lower than that they do not invest your money in it. You need a jack that can lift your vehicle the highest to ensure that any occurrence will be covered.


A 3-ton heavy-duty low profile steel floor jack will help you accomplish so many tasks from the comfort of your home. You will also save on the trips and money that you usually spend at the mechanic’s shop. Read the above-mentioned list of some of the best 3-ton floor jacks, along with the buyer’s guide to know which one is most suitable for you.

You May Also Like to Read:

Janathan Greez
Latest posts by Janathan Greez (see all)

Leave a Comment